Effect of Atmosphere in a Foundry Mould on Casting Surface Quality

被引：3
|
作者：
Chojecki, A. [1 ]
Mocek, J. [1 ]
机构：
[1] AGH Univ Sci & Technol, Fac Foundry Engn, Reymonta 23, PL-31065 Krakow, Poland
来源：
ARCHIVES OF FOUNDRY ENGINEERING | 2012年 / 12卷 / 01期
关键词：
Sand mould; Defects on casting surface; Hydrogen concentration; Ductile iron;
D O I：
10.2478/v10266-012-0003-3
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Changes of gas pressure in the moulding sand in the zone adjacent to mould cavity were analysed during pouring of cast iron. No significant effect of pressure on the surface quality of castings was observed. In the second series of tests, the concentration of hydrogen in the gas atmosphere was measured. It has been found that the value of this concentration depends on metal composition and is particularly high in cast iron containing magnesium. This is due to the reduction of water vapour with the element that has high affinity to oxygen. The presence of hydrogen causes the formation of gas-induced defects on the casting surface.
引用
收藏
页码：13 / 18
页数：6
相关论文
共 50 条
  • [21] Nanoceramic improves efficiency and quality in aluminium permanent mould casting
    Hofmann, Volker
    Faber, Stefan
    Meyer, Frank
    [J]. World of Metallurgy - ERZMETALL, 2009, 62 (04): : 224 - 229
  • [22] Study of the fluid flow in the mould for high quality slab casting
    Schulte, HBM
    Nabben, RHMG
    vanderPlas, DW
    Trizenberg, D
    [J]. REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1997, 94 (06): : 751 - 759
  • [23] Foundry in Charleroi, the casting
    Boutoulle, Myriam
    [J]. CONNAISSANCE DES ARTS, 2016, (750): : 90 - 90
  • [24] Mould temperature control in continuous casting for the reduction of surface defects
    Camisani-Calzolari, F
    Craig, I
    Pistorius, C
    [J]. ISIJ INTERNATIONAL, 2004, 44 (08) : 1393 - 1402
  • [25] Effect of modified atmosphere packaging on quality factors and shelf-life of surface mould ripened cheese: Part I constant temperature
    Rodriguez-Aguilera, Rocio
    Oliveira, Jorge C.
    Montanez, Julio C.
    Mahajan, Pramod V.
    [J]. LWT-FOOD SCIENCE AND TECHNOLOGY, 2011, 44 (01) : 330 - 336
  • [26] Effect of mineralogical composition of mould powder on continuous casting
    Attia, A.K.M.
    Hassan, M.S.
    Shalabi, M.E.H.
    El-Maksoud, A.A.
    [J]. Metallurgia Italiana, 91 (01):
  • [27] Effect of Mold Flux for Casting on Microstructe of Mould Powder
    Liu, Lina
    Han, Xiuli
    Li, Changcun
    Yang, Huiping
    [J]. ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 287 - +
  • [28] Marconi foundry - out of a different mould
    [J]. Foundry Trade Journal, 1995, 169 (3507):
  • [29] Technology of manufacturing foundry mould matrixes
    BelNIIlit, Minsk, Belarus
    [J]. Liteinoe Proizvod, 1 (9-12):
  • [30] Effect of annealing atmosphere on the quality of ZnO crystal surface
    Grasza, K.
    Lusakowska, E.
    Skupinski, P.
    Kopalko, K.
    Bak-Misiuk, J.
    Mycielski, A.
    [J]. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2007, 244 (05): : 1468 - 1472
12345