UNSTEADY SPRAYS BY A PINTLE INJECTOR

被引:4
|
作者
HARDALUPAS, Y
TAYLOR, AMKP
WHITELAW, JH
机构
关键词
D O I
10.1299/jsmeb1988.33.2_177
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Measurements of size-velocity correlations and mean diameters have been obtained with a phase-Doppler velocimeter in the space and time domains of an unsteady spray injected by a pintle petrol injector into an inert atmospheric pressure environment of a test chamber. The injector was operated at a constant injection pressure of 3 bar, and with a frequency of 10 Hz, while the injection duration was varied from 2.5 to 7 ms. The environment was saturated with petrol vapour, so that petrol evaporation was negligible during the experiment. A hollow cone spray with 10° half-angle was observed with the larger droplets outside the centreline and transporting most of the fuel flowrate. Two low velocity transitional periods, corresponding to the opening and the closing of the pintle, were observed with a higher nearly constant velocity period between the two, during which the spray was in a steady state. All droplet sizes moved with similar velocities close to the nozzle, but further downstream in the time and space domains larger droplets moved faster due to their different relaxation times.
引用
收藏
页码:177 / 185
页数:9
相关论文
共 50 条
  • [41] Effects of throttling level on spray characteristics of gas⁃liquid pintle injector unit
    Zhang, Botao
    Li, Ping
    Yang, Anlong
    Yang, Baoe
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2022, 37 (04): : 791 - 801
  • [42] LAGRANGIAN APPROACH TO AXISYMMETRIC SPRAY SIMULATION OF PINTLE INJECTOR FOR LIQUID ROCKET ENGINES
    Radhakrishnan, Kanmaniraja
    Son, Min
    Lee, Keonwoong
    Koo, Jaye
    ATOMIZATION AND SPRAYS, 2018, 28 (05) : 443 - 458
  • [43] NUMERICAL SIMULATIONS OF LIQUID FILM PRIMARY BREAKUP IN A PINTLE INJECTOR: A PARAMETRIC STUDY
    Tang, Tinglan
    Jin, Tai
    Wang, Gaofeng
    ATOMIZATION AND SPRAYS, 2024, 34 (06) : 1 - 33
  • [44] Influence of momentum ratio and its throttling method on spray characteristics of pintle injector
    Chen Hui-Yuan
    Li Qing-Lian
    Cheng Peng
    Lin Wen-Hao
    Li Chen-Yang
    ACTA PHYSICA SINICA, 2019, 68 (20)
  • [45] Design and Experimental Study of Liquid Oxygen/Methane Thrust Chamber for Pintle Injector
    Li, Jun
    Chang, Ke-Yu
    Chen, Zhan
    Li, Chun-Fei
    Yuan, Yu
    Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (11):
  • [46] THE INFLUENCE OF PLAIN-ORIFICE GEOMETRY ON PINTLE INJECTOR FLOW DISCHARGE COEFFICIENT
    Harms, Colton
    Fazeli, Hamid
    Vanaken, Jordan
    PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 10, 2021,
  • [47] Effect of radial orifice shape on leakage rate of liquid sheet in pintle injector
    Wang K.
    Lei F.
    Yang A.
    Yang B.
    Zhou L.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2021, 42 (06):
  • [48] Experimental and numerical investigations on the spray characteristics of liquid-gas pintle injector
    Zhou, Wenyuan
    Xu, Xu
    Yang, Qingchun
    Zhao, Ronghui
    Jin, Yushu
    AEROSPACE SCIENCE AND TECHNOLOGY, 2022, 121
  • [49] Design of pintle injector using Kerosene-LOx as propellant and solving the problem of pintle tip thermal damage in hot firing test
    Kang, Donghyuk
    Han, Sanghoon
    Ryu, Chulsung
    Ko, Youngsung
    ACTA ASTRONAUTICA, 2022, 201 : 48 - 58
  • [50] Spray characterization of a piezo pintle-type injector for gasoline direct injection engines
    Nouri, J. M.
    Harnid, M. A.
    Yan, Y.
    Arcoumanis, C.
    THIRD INTERNATIONAL CONFERENCE ON OPTICAL AND LASER DIAGNOSTICS (ICOLAD 2007), 2007, 85