HOT DUCTILITY OF TITANIUM-ALLOYS - A COMPARISON WITH CARBON-STEELS

被引：15
|
作者：
SUZUKI, HG
EYLON, D
机构：
[1] NIPPON STEEL CORP LTD,RES & DEV,KITAKYUSHU 805,JAPAN
[2] UNIV DAYTON,DAYTON,OH 45469
来源：
ISIJ INTERNATIONAL | 1993年 / 33卷 / 12期
关键词：
TITANIUM ALLOY; TITANIUM; HOT DUCTILITY; EMBRITTLEMENT; CARBON STEELS; HIGH TEMPERATURE TENSILE TEST;
D O I：
10.2355/isijinternational.33.1270
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Characteristics of hot ductility of various kinds of titanium alloys were examined and compared with that of carbon steels. Although carbon steels have three typical embrittling zones above 900 K, titanium alloys do not show any embrittlement in the temperature range between beta transus and 1 500 K, which is considered to be best region for hot rolling. The embrittlement occurs just below the beta transus in the coarse grain titanium alloys. The ductility is poor in the coarse grain materials, but independent of the strain rate. The mechanism of the embrittlement is considered to be due to the accumulation of strain in the beta phase attached to the grain boundary alpha in alpha and alpha + beta alloys.
引用
收藏
页码：1270 / 1274
页数：5
相关论文
共 50 条
  • [41] TITANIUM-ALLOYS AND THEIR UTILIZATION
    KORNILOV, II
    VESTNIK AKADEMII NAUK SSSR, 1973, (04) : 33 - 36
  • [42] THE IDENTIFICATION OF TITANIUM SULFIDE AND CARBOSULFIDE IN ULTRA-LOW CARBON-STEELS
    PRIKRYL, M
    LIN, YP
    SUBRAMANIAN, SV
    SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (02): : 375 - 380
  • [43] ANALYSIS OF FORCE CONDITIONS DURING HOT-ROLLING OF CARBON-STEELS
    POLUKHIN, VP
    PODYMOV, VF
    STEEL IN THE USSR, 1972, 2 (09): : 723 - 724
  • [44] EFFECT OF NITROGEN AND AUSTENITE GRAIN-SIZE ON DUCTILITY OF PEARLITIC EUTECTOID CARBON-STEELS
    YAMADA, Y
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1977, 17 (09) : 516 - 522
  • [45] Hot strength and hot ductility of titanium alloys - a challenge for continuous casting process
    Suzuki, HG
    Takakura, E
    Eylon, D
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 263 (02): : 230 - 236
  • [46] TITANIUM OR TITANIUM-ALLOYS FOR DENTAL CASTING
    IDA, K
    TSUTSUMI, S
    TOGAYA, T
    JOURNAL OF DENTAL RESEARCH, 1980, 59 : 985 - 985
  • [47] Hot Ductility Evolution Mechanism of Titanium-Bearing Microalloyed Steels
    Liu, Peng
    Zheng, Wan
    Li, Guangqiang
    Zhang, Huirong
    Zhang, Wenwen
    Wang, Chunfeng
    STEEL RESEARCH INTERNATIONAL, 2023, 94 (09)
  • [48] PLASMA NITRIDING OF TITANIUM AND TITANIUM-ALLOYS
    RIE, KT
    LAMPE, T
    METALL, 1983, 37 (10): : 1003 - 1006
  • [49] TITANIUM AND TITANIUM-ALLOYS, BIOMATERIALS OF PREFERENCE
    BREME, J
    MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1989, 86 (10): : 625 - 637
  • [50] STUDY OF DEFORMATION RESISTANCE AND STRUCTURE OF TITANIUM-ALLOYS DURING HOT UPSET
    MASHEKOV, SA
    POLYAK, EI
    RUSSIAN METALLURGY, 1994, (01): : 47 - 50
12345