SIZE EFFECT ON ROTATING BENDING FATIGUE IN STEELS

被引：11
|
作者：
HATANAKA, K [1 ]
SHIMIZU, S [1 ]
NAGAE, A [1 ]
机构：
[1] TOYOTA MOTOR CO LTD,TOYOTA 471,JAPAN
来源：
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS | 1983年 / 26卷 / 218期
关键词：
D O I：
10.1299/jsme1958.26.1288
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
JIS SF 50 forged and JIS SCMn 2A cast steels were used as a homogeneous and a faulty material, respectively. Rotating bending fatigue tests were performed for the specimen sizes from 8 to 40 mm in diameter. The fatigue limits of these specimens are discussed in terms of the cyclic strain measured on specimen surface and the scatter in fatigue strength due to defects.
引用
收藏
页码：1288 / 1295
页数：8
相关论文
共 50 条
  • [21] The effect of grain size on fatigue crack initiation in pipeline steels
    Chen, B.
    Wu, S. J.
    ENGINEERING STRUCTURAL INTEGRITY: RESEARCH, DEVELOPMENT AND APPLICATION, VOLS 1 AND 2, 2007, : 528 - 532
  • [22] EFFECT OF DEFECT SIZE ON FATIGUE-STRENGTH FOR CARBURIZED STEELS
    TANAKA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1497 - 1497
  • [23] AN OBSERVATION ON BENDING FATIGUE CRACK IN BORONIZED STEELS
    ENDOH, T
    KAWAKAMI, M
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1985, 26 (04): : 236 - 241
  • [24] BENDING FATIGUE CRACK OBSERVATION IN BORONIZED STEELS
    ENDOH, T
    KAWAKAMI, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1984, 48 (01) : 91 - 96
  • [25] ROTATING BENDING FATIGUE TESTS IN A HYDROSTATIC ENVIRONMENT
    GUSTAFSON, CG
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1976, 98 (04): : 380 - 381
  • [26] Effect of radical nitriding on fatigue strength of Alloy 718 under rotating bending
    Yamane K.
    Ohta A.
    Kawagoishi N.
    Morino K.
    Fukada K.
    Zairyo/Journal of the Society of Materials Science, Japan, 2010, 59 (11) : 827 - 832
  • [27] Effect of multifunction cavitation on rotating bending fatigue properties of steel rods and its fatigue limit estimation
    Kikuchi, Shoichi
    Minamizawa, Kenta
    Ogi, Takayuki
    Ono, Keisuke
    Yoshimura, Toshihiko
    Ijiri, Masataka
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 176
  • [28] COMPARISON OF BENDING AND ROTATING BENDING FATIGUE OF LOW-CARBON STEEL
    Angelova, Donka
    Yordanova, Rozina
    Krasstev, Dimiter
    Yordanov, Boyan
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2010, 10 (03): : 193 - 197
  • [29] ON CORROSION FATIGUE MECHANISMS FOR S45C AND SCM435 STEELS IN ROTATING BENDING.
    Masuda, Chitoshi
    Nishijima, Satoshi
    Abe, Takayuki
    Sumiyoshi, Hideshi
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1984, 50 (453): : 1019 - 1025
  • [30] Investigation into the size effect on four-point bending fatigue tests
    Li, N.
    Molenaar, A. A. A.
    van de Ven, M. F. C.
    Pronk, A. C.
    Wu, S.
    FOUR-POINT BENDING, 2012, : 35 - 47
12345