SAFETY ASPECTS OF TRITIUM STORAGE IN METAL HYDRIDE FORM

被引:8
|
作者
PEREVEZENTSEV, AN [1 ]
BELL, AC [1 ]
LASSER, R [1 ]
RIVKIS, LA [1 ]
机构
[1] RUSSIAN RES INST INORGAN MAT,MOSCOW 123060,RUSSIA
来源
FUSION TECHNOLOGY | 1995年 / 28卷 / 03期
关键词
D O I
10.13182/FST95-A30608
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
Air or nitrogen ingress accident scenarios into JET tritium storage containers, filled with uranium or intermetallic compound (IMC) hydrides, are discussed based on the experimentally determined kinetics of the reaction of these hydrides with air, O-2 and N-2. Reaction of uranium with air can occur at room temperature. For the initiation of the reactions of uranium with N-2 or of some intermetallic compounds with air, elevated temperatures are required. Temperature rises of the metal hydrides due to air ingress are estimated for various cases. Modern tritium storage containers are protected against air ingress by intermediate and secondary containments which can be either evacuated or filled with inert gas. Therefore, air ingress can only occur due to double failure: failure of secondary containment and process containment at the same time. At JET, the secondary containments are filled with N-2 However, even for N-2, temperature increases are expected during the ingress into uranium beds (U-beds) for particular scenarios. It is shown that the JET design would not fail in this event. The calculation also shows that the smallest temperature rises during air, O-2 or N-2 ingress are expected for a getter bed design with free space above the metal getter layer for the gas to flow from inlet to outlet tube, because the reaction with the metal powder is limited by the diffusion rate of the gas through the powder. Estimates with ZrCo as getter are also made.
引用
收藏
页码:1404 / 1409
页数:6
相关论文
共 50 条
  • [21] On the optimisation of hydrogen storage in metal hydride beds
    Georgiadis, MC
    Kikkinides, ES
    Stubos, AK
    European Symposium on Computer-Aided Process Engineering-15, 20A and 20B, 2005, 20a-20b : 763 - 768
  • [22] Metal hydride storage requirements for transportation applications
    TRaissi, A
    IECEC 96 - PROCEEDINGS OF THE 31ST INTERSOCIETY ENERGY CONVERSION ENGINEERING CONFERENCE, VOLS 1-4, 1996, : 2280 - 2285
  • [23] Modellization of Metal Hydride Canister for Hydrogen Storage
    Maceiras, R.
    Alfonsin, V.
    Cancela, A.
    Sanchez, A.
    EUROPEAN JOURNAL OF SUSTAINABLE DEVELOPMENT, 2015, 4 (02): : 129 - 134
  • [24] METAL HYDRIDE STORAGE FOR MOBILE AND STATIONARY APPLICATIONS
    HOFFMAN, KC
    REILLY, JJ
    SALZANO, FJ
    WAIDE, CH
    WISWALL, RH
    WINSCHE, WE
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 1976, 1 (02) : 133 - 151
  • [25] CHARACTERIZATION OF METAL TRITIDES FOR TRANSPORT, STORAGE, AND DISPOSAL OF TRITIUM
    BOWMAN, RC
    CARLSON, RS
    DESANDO, RJ
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1976, 24 (NOV19): : 496 - 498
  • [27] HYDRATION CHARACTERISTICS OF METAL HYDRIDE FIXED IN RESIN FORM
    WATANABE, F
    IKAI, C
    HASATANI, M
    MARUMO, C
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1992, 25 (01) : 1 - 5
  • [28] Metal hydride hydrogen storage and compression systems for energy storage technologies
    Tarasov, Boris P.
    Fursikov, Pavel V.
    Volodin, Alexey A.
    Bocharnikov, Mikhail S.
    Shimkus, Yustinas Ya
    Kashin, Aleksey M.
    Yartys, Volodymyr A.
    Chidziva, Stanford
    Pasupathi, Sivakumar
    Lototskyy, Mykhaylo V.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2021, 46 (25) : 13647 - 13657
  • [29] SOME NEW TECHNIQUES IN TRITIUM GAS HANDLING AS APPLIED TO METAL HYDRIDE SYNTHESIS
    NASISE, JE
    FUSION TECHNOLOGY, 1988, 14 (02): : 744 - 749
  • [30] Safety Aspects of Energy Storage Testing
    Bewley, Randy
    Dufek, Eric J.
    Egan, Steven E.
    Jamison, David K.
    Ashton, Clair
    Ho, Chinh D.
    Evans, Michael C.
    Bennett, Taylor L.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2019, 166 (08) : E263 - E265