Preparation and Characterization of Ti-10Mo Alloy by Mechanical Alloying

被引：0
|
作者：
Gao, Zhifang [1 ]
Luo, Honglin [1 ]
Li, Qunying [1 ]
Wan, Yizao [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin Key Lab Composite & Funct Mat, Tianjin 300072, Peoples R China
来源：
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS | 2012年 / 1卷 / 06期
基金：
中国国家自然科学基金;
关键词：
Ti-10Mo alloy; Mechanical alloying; Vickers hardness; Corrosion behavior;
D O I：
10.1007/s13632-012-0045-5
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In the present study, Ti-10Mo alloy was fabricated by mechanical alloying and subsequently consolidated by powder metallurgy techniques. The structural evolution of the powder blends with various milling durations, and the sintered alloys with different holding times, were characterized by x-ray diffraction, scanning electron microscopy, and light microscopy. The results revealed that the size of powder particles decreased with increasing milling time. In addition, only the sintered alloy using powders milled for 5 h exhibited both a-phase and beta-phase. When the milling time increased to greater than 40 h, TiN phase gradually formed, which suppressed the alpha-phase to beta-phase transformation. Furthermore, the effects of the sinter holding time on the Vickers hardness and the corrosion behavior of Ti-10Mo alloys was also investigated. The results showed that the Vickers hardness increased with increasing sinter holding time; after sintering the alloy for 5 h, the samples exhibited acceptable corrosion resistance.
引用
收藏
页码：282 / 289
页数：8
相关论文
共 50 条
  • [41] Alloying Behaviour and Microstructural Changes of a Ti-10% Mo-10%Cr Alloy on Sintering Process
    Syarif, Junaidi
    Kurniawan, Eko
    Rohmannudin, Tubagus N.
    Rasani, Mohamad Rasidi
    Sajuri, Zainuddin
    SAINS MALAYSIANA, 2018, 47 (04): : 811 - 817
  • [42] Preparation of Nanocrystalline Ti-6Al-4V Alloy by Mechanical Alloying
    Wang, Jiahui (957302535@qq.com), 1600, Science Press (46):
  • [43] Preparation of Nanocrystalline Ti-6Al-4V Alloy by Mechanical Alloying
    Wang Jiahui
    Wu Chengling
    Shi Qingnan
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (03) : 783 - 789
  • [44] Progress in technologies for preparation of Ti alloy and Ti alloy parts with Ti alloy powder by hydrogen alloying
    Zhao, Jiaqi
    Nan, Hai
    Huang, Dong
    Tezhong Zhuzao Ji Youse Hejin/Special Casting and Nonferrous Alloys, 2007, 27 (08): : 593 - 595
  • [45] PREPARATION OF (TI0.8MO0.2)C-NI CERMET BY MECHANICAL ALLOYING
    Hosokawa, Hiroyuki
    Kato, Kiyotaka
    Shimojima, Koji
    Matsumoto, Akihiro
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2011, : 619 - 623
  • [46] PREPARATION OF AMORPHOUS NI-50 AT-PERCENT MO ALLOY POWDER BY MECHANICAL ALLOYING
    ZDUJIC, MV
    KOBAYASHI, KF
    SHINGU, PH
    ZEITSCHRIFT FUR METALLKUNDE, 1992, 83 (02): : 136 - 139
  • [47] MULTICOMPONENT ALLOY POWDERS PREPARATION BY MECHANICAL ALLOYING
    Moravcik, Igor
    Cizek, Jan
    Dlouhy, Ivo
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1588 - 1593
  • [48] Synthesis of Mg-Ti alloy by mechanical alloying
    Liang, G
    Schulz, R
    JOURNAL OF MATERIALS SCIENCE, 2003, 38 (06) : 1179 - 1184
  • [49] Synthesis of Mg-Ti alloy by mechanical alloying
    G. Liang
    R. Schulz
    Journal of Materials Science, 2003, 38 : 1179 - 1184
  • [50] Cu对牙科用Ti-10Mo合金组织和硬度的影响
    丁宇邹
    朱达川
    葛向南
    热加工工艺, 2012, 41 (20) : 33 - 36
12345