Lifetime-oriented multi-objective optimization of structural maintenance considering system reliability, redundancy and life-cycle cost using GA

被引:138
|
作者
Okasha, Nader M. [1 ]
Frangopol, Dan M. [1 ]
机构
[1] Lehigh Univ, Dept Civil & Environm Engn, Ctr Adv Technol Large Struct Syst ATLSS, Bethlehem, PA 18015 USA
基金
美国国家科学基金会;
关键词
Structural systems; Redundancy; Reliability; Maintenance; Optimization; Genetic algorithms; BRIDGE MAINTENANCE;
D O I
10.1016/j.strusafe.2009.06.005
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The need to design and construct structural systems with adequate levels of reliability and redundancy is widely acknowledged. It is as crucial that these desired levels are maintained above target levels throughout the life of the structure. Optimization has served well in providing safer and more economical maintenance strategies. Lifetime maintenance optimization based on system reliability has already been proposed. It is still needed, however, to incorporate redundancy in the lifetime maintenance optimization process. Treating both system reliability and redundancy as criteria in the lifetime optimization process can be highly rewarding. The complexity of the process, however, requires the automation of solving the optimization problem. Genetic algorithms (GAs) are used in this study to obtain solutions to the multi-objective optimization problems considering system reliability, redundancy and life-cycle cost (LCC). An approach to provide the optimization program the ability to optimally select what maintenance actions are applied, when they are applied, and to which structural components they are applied is presented. Two different strategies are proposed. The first strategy has the ability to optimally select mixed maintenance types to apply to different parts of the structure at the same time. This strategy can be used in cases where any combination of different maintenance options can be practically applied to any part of the structure. The application of this strategy on truss structures is shown in a numerical example. The second strategy can be used when a limited number of possibilities of practical maintenance options are available. The application of this strategy to bridge structures is shown in a numerical example. The greatest advantage of the proposed approach (both strategies) is its ability to avoid the application of maintenance interventions to structural components that are not critical. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:460 / 474
页数:15
相关论文
共 50 条
  • [31] Life-cycle cost assessment of RC and ECC frames using structural optimization
    Gencturk, Bora
    [J]. EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2013, 42 (01): : 61 - 79
  • [32] Considering Life Cycle Greenhouse Gas Emissions in Power System Expansion Planning for Europe and North Africa Using Multi-Objective Optimization
    Junne, Tobias
    Cao, Karl-Kien
    Miskiw, Kim Kira
    Hottenroth, Heidi
    Naegler, Tobias
    [J]. ENERGIES, 2021, 14 (05)
  • [33] Spatial layout optimization of green infrastructure based on life-cycle multi-objective optimization algorithm and SWMM model
    Zhu, Yifei
    Xu, Changqing
    Liu, Zijing
    Yin, Dingkun
    Jia, Haifeng
    Guan, Yuntao
    [J]. RESOURCES CONSERVATION AND RECYCLING, 2023, 191
  • [34] Multi-objective reliability and cost optimization of fuel cell vehicle system with fuzzy feasibility
    Mellal, Mohamed Arezki
    Zio, Enrico
    Pecht, Michael
    [J]. INFORMATION SCIENCES, 2023, 640
  • [35] Optimum maintenance of deteriorated steel bridges using corrosion resistant steel based on system reliability and life-cycle cost
    Han, Xu
    Yang, David Y.
    Frangopol, Dan M.
    [J]. ENGINEERING STRUCTURES, 2021, 243
  • [36] Time-variant reliability-oriented structural optimization and a renewal model for life-cycle costing
    Streicher, H
    Rackwitz, R
    [J]. PROBABILISTIC ENGINEERING MECHANICS, 2004, 19 (1-2) : 171 - 183
  • [37] Multi-objective optimization of grid-connected PV-wind hybrid system considering reliability, cost, and environmental aspects
    Barakat, Shimaa
    Ibrahim, Haitham
    Elbaset, Adel A.
    [J]. SUSTAINABLE CITIES AND SOCIETY, 2020, 60 (60)
  • [38] Multi-objective reliability based design optimization of coupled acoustic-structural system
    Dammak, Khalil
    El Hami, Abdelkhalak
    [J]. ENGINEERING STRUCTURES, 2019, 197
  • [39] Optimization of Life Cycle Cost and Environmental Impact Functions of NiZn Batteries by Using Multi-Objective Particle Swarm Optimization (MOPSO)
    Malviya, Ashwani Kumar
    Malekzadeh, Mehdi Zarehparast
    Santarremigia, Francisco Enrique
    Molero, Gemma Dolores
    Sanchis, Ignacio Villalba
    Fernandez, Pablo Martinez
    Yepes, Victor
    [J]. SUSTAINABILITY, 2024, 16 (15)
  • [40] Comparing the life-cycle cost of optimal bridge designs using a lifetime reliability-based approach
    Garcia-Segura, Tatiana
    Yepes, Victor
    Frangopol, Dan M.
    Yang, David Y.
    [J]. LIFE-CYCLE OF ENGINEERING SYSTEMS: EMPHASIS ON SUSTAINABLE CIVIL INFRASTRUCTURE, 2017, : 1146 - 1153