Microstructure and Mechanical Properties of Alumina/Zirconia Layered Composites

被引：0

作者：

Lyu, Seung Woo ^{[1
]}

Park, Young Min ^{[1
]}

Yang, Tae Young ^{[1
]}

Ryu, Su Chak ^{[2
]}

Kim, Young Woo ^{[3
]}

Yoon, Seog Young ^{[1
]}

Park, Hong Chae ^{[1
]}

机构：

[1] Pusan Natl Univ, Sch Mat Sci & Engn, Busan 609735, South Korea

[2] Pusan Natl Univ, Dept Nano Informat Mat Sci & Engn, Miryang 627702, South Korea

[3] Res Inst Ind Sci & Technol, Funct Mat Res Team, Pohang 790330, South Korea

来源：

JOURNAL OF THE KOREAN CERAMIC SOCIETY | 2006年 / 43卷 / 03期

关键词：

Symmetric three-layer Al2O3/ZrO2 composite; Freeze casting;

D O I：

10.4191/kcers.2006.43.3.193

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Symmetric three-layer Al2O3/ZrO2 composite has been prepared by freeze casting and pressureless sintering at 1400-1600 degrees C in air. The layered material sintered at 1600 degrees C showed the maximum fracture strength (410 MPa), measured by a four-point bending test. Contact damage strength was superior in three-layer composite compared with corresponding mono-layered material, possibly due to the development of relatively large compressive stress. The grain growth of ZrO2 particles was mainly governed by coalescence mechanism.

引用

页码：193 / 197

页数：5

共 50 条

[21] Alumina/alumina and alumina-zirconia/alumina-zirconia joints through glass interlayers, microstructure, mechanical properties and residual stresses
Faga, MG
Guicciardi, S
Esposito, L
Bellosi, A
Pezzotti, G
[J]. ADVANCED ENGINEERING MATERIALS, 2005, 7 (06) : 535 - 540
[22] Microstructure and mechanical properties of atomic layer deposited alumina doped zirconia
Piirsoo, Helle-Mai
Jogiaas, Taivo
Mandar, Hugo
Ritslaid, Peeter
Kukli, Kaupo
Tamm, Aile
[J]. AIP ADVANCES, 2021, 11 (05)
[23] THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF MULLITE-ZIRCONIA COMPOSITES
DEPORTU, G
HENNEY, JW
[J]. TRANSACTIONS AND JOURNAL OF THE BRITISH CERAMIC SOCIETY, 1984, 83 (03): : 69 - 72
[24] Microstructure and mechanical properties of mullite/zirconia composites prepared from alumina and zircon under various firing conditions
Koyama, T
Hayashi, S
Yasumori, A
Okada, K
Schmucker, M
Schneider, H
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1996, 16 (02) : 231 - 237
[25] Investigation of the microstructure, mechanical properties and cell viability of zirconia-toughened alumina composites reinforced with carbon nanotubes
Akin, Ipek
[J]. JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2015, 123 (1437) : 405 - 413
[26] Effect of SiC additions on microstructure, mechanical properties and thermal shock behaviour of alumina-mullite-zirconia composites
Majidian, H.
Ebadzadeh, T.
Salahi, E.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 530 : 585 - 590
[27] Structural, physical and mechanical properties of zirconia-polymorph/alumina composites
Murti, C. F. K.
Maslakah, U.
Endarko, E.
Triwikantoro, T.
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2022, 285
[28] Assessment of mechanical properties by nano- and microindentation of alumina/zirconia composites
Sadowski, Tomasz
Losiewicz, Kamil
Boniecki, Marek
Szutkowska, Magdalena
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 4196 - 4201
[29] Effect of the particulate size on mechanical properties of alumina-zirconia composites
Garcia, D. E.
Hotza, D.
[J]. MATERIALS LETTERS, 2012, 82 : 88 - 90
[30] MECHANICAL-PROPERTIES OF COMPOSITES OF ALUMINA AND PARTIALLY-STABILIZED ZIRCONIA
SORNAKUMAR, T
ANNAMALAI, VE
KRISHNAMURTHY, R
GOKULARATHNAM, CV
[J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1993, 12 (16) : 1283 - 1285

← 1 2 3 4 5 →