THE DESIGN OF TE STORAGE CAVITIES FOR A RF PULSE COMPRESSOR SYSTEM

被引：0
|
作者：
FERNANDES, P [1 ]
PARODI, R [1 ]
SALVO, C [1 ]
SPATARO, B [1 ]
机构：
[1] LAB NAZL FRASCATI,ROME,ITALY
来源：
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT | 1990年 / 288卷 / 2-3期
关键词：
D O I：
10.1016/0168-9002(90)90151-U
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
This paper deals with the design of high-Q0 TE resonators for high-efficiency rf pulse compression. The aim of our study was the development of a storage resonator to be used for an energy doubler (similar to the one used on the Stanford linac energy doubler (SLED) to increase the beam energy of the Stanford linac to 53 GeV), but to be used for a linac having a quite long filling time of 1.2 ωs. For this reason the storage resonator must be designed for an unloaded Q0 of roughly 105. By using our OSCAR2D computer code (which computes the resonant frequency, Q0 and geometry factor for any reasonable TE or TM monopolar mode of cylindrically symmetric rf cavities) we found an optimum resonator geometry. On this geometry we get the benefit of a Q0 about 10% higher than that of an ideal cylindrical cavity together with the splitting of TE0mn-like and TM1mn-like modes which in a cylindrical cavity are coalescent. © 1990.
引用
收藏
页码：549 / 554
页数：6
相关论文
共 50 条
  • [31] CRYOGENIC SYSTEM FOR TRISTAN SUPERCONDUCTING RF CAVITIES
    HOSOYAMA, K
    HARA, K
    KABE, A
    KOJIMA, Y
    OGITSU, T
    SAKAMOTO, Y
    KAWAMURA, S
    MATSUMOTO, K
    FUSION ENGINEERING AND DESIGN, 1993, 20 : 491 - 498
  • [32] Design of a holographic optical element for a pulse compressor
    Simon, JM
    Arias, I
    Blesa, A
    GonzalezTalavan, G
    APPLIED OPTICS, 1996, 35 (01): : 33 - 37
  • [33] Design, fabrication, and cold-test results of C-band spherical RF pulse compressor prototype
    Zong-Bin Li
    Wen-Cheng Fang
    Qiang Gu
    Jian-Hao Tan
    Xiao-Xia Huang
    Zhen-Tang Zhao
    Radiation Detection Technology and Methods, 2019, 3
  • [34] Design, fabrication, and cold-test results of C-band spherical RF pulse compressor prototype
    Li, Zong-Bin
    Fang, Wen-Cheng
    Gu, Qiang
    Tan, Jian-Hao
    Huang, Xiao-Xia
    Zhao, Zhen-Tang
    RADIATION DETECTION TECHNOLOGY AND METHODS, 2019, 3 (03)
  • [35] Improvement of the blade tuner design for superconducting RF cavities
    Pagani, C
    Bosotti, A
    Michelato, P
    Panzeri, N
    Pierini, P
    2005 IEEE PARTICLE ACCELERATOR CONFERENCE (PAC), VOLS 1-4, 2005, : 3631 - 3633
  • [36] Conceptual design of the RF accelerating cavities for a superconducting cyclotron
    Maggiore, M
    Calabretta, L
    Di Giacomo, M
    Rifuggiato, D
    Battaglia, D
    Piazza, L
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2006, 557 (02): : 414 - 420
  • [37] Design a logamp RF pulse detector
    Nash, E
    MICROWAVES & RF, 2000, 39 (01) : 62 - +
  • [38] Theoretical and Experimental Studies on Microwave Pulse Compressor Storage Efficiency
    Katsara, Vasiliki A.
    Ioannidis, Zisis C.
    Narlis, Aithon
    Savaidis, Stylianos P.
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2022, 70 (10) : 4365 - 4375
  • [39] Design and test of double PI-control loop to generate flat-top output of RF pulse compressor
    Xu Y.
    Zhang J.
    Xiao C.
    Fang W.
    He Jishu/Nuclear Techniques, 2022, 45 (06):
  • [40] System Design for Compressor Reliability
    Garland, Milton W.
    ASHRAE JOURNAL, 2009, 51 (07) : 42 - +
12345