THE INFLUENCE OF SELECTED FACTORS ON THE STRENGHT OF WOOD ADHESIVE JOINTS

被引：4

作者：

Rudawska, Anna ^{[1
]}

Maziarz, Marek ^{[1
]}

Sajgalik, Michal ^{[2
]}

Valasek, Petr ^{[3
]}

Zlamal, Tomas ^{[4
]}

Iasnii, Volodymyr ^{[5
]}

机构：

[1] Lublin Univ Technol, Fac Mech Engn, Ul Nadbystrzycka 36, PL-20618 Lublin, Poland

[2] Univ Zilina, Fac Mech Engn, Univ 1, Zilina 01026, Slovakia

[3] Czech Univ Life Sci Prague, Fac Engn, Prague 16521, Czech Republic

[4] Tech Univ Ostrava, Fac Mech Engn, 17 Listopadu 15, Ostrava 70833, Czech Republic

[5] Ternopil Ivan Puluj Natl Tech Univ, Fac Engn Machines Struct & Technol, Ruska Str 56, UA-46001 Ternopol, Ukraine

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2018年 / 12卷 / 03期

关键词：

adhesive joint; strength; pine wood; oak wood;

D O I：

10.12913/22998624/92099

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper examines the effect of selected factors on the wood bonded joint strength. The structural factor under scrutiny was the geometry of the surface area; however, other major dimensions of adherends were compared as well. The tests were performed on 6 joint types: butt, v-shaped. interlocking. scarf, tongue & groove, and single lap joints. which were formed on two types of substrate materials - pine and oak wood, and adhesively bonded. The joints were bonded with Prefere 6312 wood adhesive and Loctite 3430 two-component epoxy adhesive. Strength testing of the joints was performed on Zwick/Roell Z150 material testing machine, according to DIN EN 1465 standard. The results obtained from the tests indicate that bonded joints of oak wood exhibit higher strength properties than those of pine wood adherends, which was confirmed in nearly all strength tests.

引用

页码：47 / 54

页数：8

共 50 条

[41] Adhesive thickness influence on the shear fracture toughness measurements of adhesive joints
Figueiredo, J. C. P.
Campilho, R. D. S. G.
Marques, E. A. S.
Machado, J. J. M.
da Silva, L. F. M.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 83 : 15 - 23
[42] The Influence of Adhesive Compounds Biochemical Modification on the Mechanical Properties of Adhesive Joints
Rudawska, Anna
Haniecka, Izabela
Jaszek, Magdalena
Stefaniuk, Dawid
POLYMERS, 2018, 10 (04)
[43] Adhesive thickness influence on the shear fracture toughness measurements of adhesive joints
Figueiredo, J.C.P.
Campilho, R.D.S.G.
Marques, E.A.S.
Machado, J.J.M.
da Silva, L.F.M.
International Journal of Adhesion and Adhesives, 2018, 83 : 15 - 23
[44] The influence of mode mixity and adhesive system on the fatigue life of adhesive joints
Sousa, Fernando Castro
Akhavan-Safar, Alireza
Goyal, Rakesh
da Silva, Lucas F. M.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2020, 43 (10) : 2337 - 2348
[45] INFLUENCE OF ONE SUBSTRATE ON INTERACTION OF ADHESIVE WITH ANOTHER SUBSTRATE IN ADHESIVE JOINTS
POLSMAN, GS
GINZBURG, LV
VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA B, 1976, 18 (05): : 319 - 322
[46] INFLUENCE OF ADHESIVE NONLINEARITIES ON PERFORMANCE AND OPTIMAL LENGTH OF ADHESIVE BONDED JOINTS
RAMAMURTHY, TS
RAO, AK
MECHANICS RESEARCH COMMUNICATIONS, 1978, 5 (01) : 9 - 14
[47] STRENGHT AND MICROSTRUCTURE ANALYSIS OF SPOT WELDED JOINTS
Cesnavicius, Ramunas
Kilikevicius, Sigitas
Krasauskas, Povilas
Jurgaitis, Vytautas
IRF2018: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON INTEGRITY-RELIABILITY-FAILURE, 2018, : 243 - 246
[48] THE INFLUENCE OF THE SELECTED FACTORS ON THE CUTTING INPUT POWER IN SAWING FROZEN BEECH WOOD
Siklienka, Mikulas
Frykova, Daniela
PROCEEDINGS OF THE 3RD INTERNATIONAL SCIENTIFIC CONFERENCE ON WOODWORKING TECHNIQUES, 2009, : 101 - 108
[49] AN INFLUENCE OF SELECTED FACTORS ON THE WOOD SURFACED ROUGHNESS TREATED WITH WATER BASED COATINGS
Slabejova, Gabriela
Moza, Martin
ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2010, 52 (01): : 47 - 54
[50] INFLUENCE OF SELECTED FACTORS ON WOOD THICKNESS CHANGE AFTER ITS COMPRESSING BY ROLLING
Makovinyi, Slavomir
Zemiar, Jan
ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2012, 54 (02): : 39 - 46

← 1 2 3 4 5 →