THE INFLUENCE OF SELECTED FACTORS ON THE STRENGHT OF WOOD ADHESIVE JOINTS

被引：4

作者：

Rudawska, Anna ^{[1
]}

Maziarz, Marek ^{[1
]}

Sajgalik, Michal ^{[2
]}

Valasek, Petr ^{[3
]}

Zlamal, Tomas ^{[4
]}

Iasnii, Volodymyr ^{[5
]}

机构：

[1] Lublin Univ Technol, Fac Mech Engn, Ul Nadbystrzycka 36, PL-20618 Lublin, Poland

[2] Univ Zilina, Fac Mech Engn, Univ 1, Zilina 01026, Slovakia

[3] Czech Univ Life Sci Prague, Fac Engn, Prague 16521, Czech Republic

[4] Tech Univ Ostrava, Fac Mech Engn, 17 Listopadu 15, Ostrava 70833, Czech Republic

[5] Ternopil Ivan Puluj Natl Tech Univ, Fac Engn Machines Struct & Technol, Ruska Str 56, UA-46001 Ternopol, Ukraine

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2018年 / 12卷 / 03期

关键词：

adhesive joint; strength; pine wood; oak wood;

D O I：

10.12913/22998624/92099

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper examines the effect of selected factors on the wood bonded joint strength. The structural factor under scrutiny was the geometry of the surface area; however, other major dimensions of adherends were compared as well. The tests were performed on 6 joint types: butt, v-shaped. interlocking. scarf, tongue & groove, and single lap joints. which were formed on two types of substrate materials - pine and oak wood, and adhesively bonded. The joints were bonded with Prefere 6312 wood adhesive and Loctite 3430 two-component epoxy adhesive. Strength testing of the joints was performed on Zwick/Roell Z150 material testing machine, according to DIN EN 1465 standard. The results obtained from the tests indicate that bonded joints of oak wood exhibit higher strength properties than those of pine wood adherends, which was confirmed in nearly all strength tests.

引用

页码：47 / 54

页数：8

共 50 条

[1] Strain distributions in adhesive wood joints
Zink, AG
Davidson, RW
Hanna, RB
JOURNAL OF ADHESION, 1996, 56 (1-4): : 27 - 43
[2] The Influence of Technological Factors on the Strength of Adhesive Joints of Steel Sheets
Doluk, Elzbieta
Rudawska, Anna
Brunella, Valentina
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2020, 14 (01) : 107 - 115
[3] Influence of pressure on the radial and tangential penetration of adhesive resin into poplar wood and on the shear strength of adhesive joints
Gavrilović-Grmuša I.
Dunky M.
Djiporović-Momčilović M.
Popović M.
Popović J.
Gavrilović-Grmuša, Ivana (ivana.grmusa@sfb.bg.ac.rs), 1600, North Carolina State University (11): : 2238 - 2255
[4] Influence of Pressure on the Radial and Tangential Penetration of Adhesive Resin into Poplar Wood and on the Shear Strength of Adhesive Joints
Gavrilovic-Grmusa, Ivana
Dunky, Manfred
Djiporovic-Momcilovic, Milanka
Popovic, Mladjan
Popovic, Jasmina
BIORESOURCES, 2016, 11 (01): : 2238 - 2255
[5] An investigation of the influence of selected factors on the properties of spruce wood
Walter Sonderegger
Daniel Mandallaz
Peter Niemz
Wood Science and Technology, 2008, 42 : 281 - 298
[6] An investigation of the influence of selected factors on the properties of spruce wood
Sonderegger, Walter
Mandallaz, Daniel
Niemz, Peter
WOOD SCIENCE AND TECHNOLOGY, 2008, 42 (04) : 281 - 298
[7] HEAT RESISTANCE OF ADHESIVE JOINTS FOR WOOD CONSTRUCTIONS
Sedliacik, Jan
Smidriakova, Maria
ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2012, 54 (02): : 87 - 94
[8] Technological heterogeneity of adhesive bonds in wood joints
Smardzewski, J
WOOD SCIENCE AND TECHNOLOGY, 2002, 36 (03) : 213 - 227
[9] DETERMINATION OF THE RELATIVE ACIDITY OF WOOD AND ADHESIVE JOINTS
DEMARCO, FA
SMITH, EA
INDUSTRIAL AND ENGINEERING CHEMISTRY-ANALYTICAL EDITION, 1946, 18 (12): : 775 - 777
[10] Technological heterogeneity of adhesive bonds in wood joints
J. Smardzewski
Wood Science and Technology, 2002, 36 : 213 - 227

← 1 2 3 4 5 →