THE MECHANICAL AND TRIBOLOGICAL BEHAVIOR OF CU-NB IN-SITU COMPOSITES

被引：11
|
作者：
LIU, P
BAHADUR, S
VERHOEVEN, JD
机构：
[1] IOWA STATE UNIV SCI & TECHNOL,DEPT MECH ENGN,AMES,IA 50011
[2] IOWA STATE UNIV SCI & TECHNOL,DEPT MAT SCI & ENGN,US DOE,AMES LAB,AMES,IA 50011
来源：
WEAR | 1993年 / 166卷 / 02期
关键词：
D O I：
10.1016/0043-1648(93)90254-J
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The mechanical and tribological properties of Cu-Nb in situ composites were studied. The composites were prepared by consumable arc melting of Cu and Nb electrodes, by casting, and by successive deformation of the cast ingot. Dry sliding friction and wear tests were performed in a pin-on-disk set-up, with the composite pin rubbing under atmospheric conditions against a hardened tool steel disk surface. The effect of Nb proportion on the tribological behavior of Cu-Nb composites was studied. It was found that the coefficient of friction decreased with increasing Nb proportion in the composite and that Cu-20vol.%Nb composite had the best wear resistance. The effect of prior deformation strain on the coefficient of friction and wear of Cu-15vol.%Nb composites was also investigated. The micromechanisms of wear were studied by scanning electron microscopy. It was concluded that cracking in the severely work hardened regions led to the generation of wear particles.
引用
收藏
页码：133 / 139
页数：7
相关论文
共 50 条
  • [21] Cold-deformed Cu-Ag and Cu-Nb composites
    Han, K
    Ishmaku, A
    Xin, Y
    Kalu, PN
    ULTRAFINE GRAINED MATERIALS III, 2004, : 273 - 278
  • [22] Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles
    Yuan, Linlin
    Han, Jingtao
    Liu, Jing
    Jiang, Zhengyi
    TRIBOLOGY INTERNATIONAL, 2016, 98 : 41 - 47
  • [23] Microstructure and properties of Cu-Nb and Cu-Ag nanofiber composites
    Rdzawski, Z.
    Gluchowski, W.
    Stobrawa, J.
    Kempinski, W.
    Andrzejewski, B.
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2015, 15 (03) : 689 - 697
  • [24] Structure and mechanical properties of ribbon Cu-Nb microcomposite
    Tykhonovs'ky, MA
    Kupriyanov, AA
    Pikalov, AI
    Stoyev, PI
    Stetsenko, SP
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2006, 28 (02): : 163 - 171
  • [25] Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites
    Primorac, Mladen-Mateo
    Abad, Manuel David
    Hosemann, Peter
    Kreuzeder, Marius
    Maier, Verena
    Kiener, Daniel
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 625 : 296 - 302
  • [26] The mechanical behavior of in-situ NiAl refractory metal composites
    Yang, JM
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1997, 49 (08): : 40 - 43
  • [27] Hardness, electrical resistivity, and modeling of in situ Cu-Nb microcomposites
    Deng, Liping
    Han, Ke
    Hartwig, Karl T.
    Siegrist, Theo M.
    Dong, Lianyang
    Sun, Zeyuan
    Yang, Xiaofang
    Liu, Qing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 602 : 331 - 338
  • [28] ANISOTROPIC SUPERCONDUCTING CRITICAL CURRENTS FOR INSITU COMPOSITES CU-NB
    ZHAO, ZX
    CUI, CG
    GUO, SO
    FINNEMORE, DK
    VERHOEVEN, JD
    CHINESE PHYSICS, 1985, 5 (03): : 776 - 781
  • [29] Multiscale modeling of the electrical behavior of Cu-Nb nanocomposites
    Gu, T.
    Herve-Luanco, E.
    Proudhon, H.
    Thilly, L.
    Dubois, J. -B.
    Lecouturier, F.
    Castelnau, O.
    Forest, S.
    MATERIAUX & TECHNIQUES, 2015, 103 (03):
  • [30] Tribological Properties of Cu Based Friction Composites with in-situ synthesized TiC Filler
    Chen, Baiming
    Zhang, Zhengyu
    Wang, Mingxu
    Han, Guocai
    An, Liang
    MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3, 2011, 160-162 : 35 - 47
12345