Flow dynamics in low aspect ratio dump combustor

被引:0
|
作者
Yadav, N. P. [1 ]
Kushari, Abhijit [2 ]
机构
[1] BIET, Dept Mech Engn, Jhansi 284128, Uttar Pradesh, India
[2] Indian Inst Technol, Dept Aerosp Engn, Kanpur 208016, Uttar Pradesh, India
关键词
Dump cornbustor; Flow dynamics; Circulatt; Turbulence; Stream func;
D O I
10.1016/j.jppr.2014.12.002
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
This paper reports an experimental investigation of the flow field inside a low aspect ratio dump combustor. The length of the combustor studied was less than the reattachment length for the separated flow. The exit of the combustor is tapered which supports the flow reversal from the exit section. The flow field behaviour in the combustor is evaluated from pressure and velocity measurement studies. The velocity, stream function and pressure distribution inside the combustor are used to elucidate the presence of recirculation and flow reversal from the exit section of the combustor for different Reynolds numbers. A small Variation in U-rms velocity was observed in axial direction while in the radial direction it was quite high. Two recirculation zones are recognized and the strength of the recirculation was seen to increase with flow Reynolds number. The turbulence intensity in the recirculation and shear layer zone was seen to be higher than the potential core. (C) 2015 National Laboratory for Aeronautics and Astronautics. Production and hosting by Elsevier B.V. All rights reserved.
引用
收藏
页码:187 / 195
页数:9
相关论文
共 50 条
  • [41] THE EFFECTS OF COWLING GEOMETRY, AREA RATIO AND DUMP GAP ON A COMBUSTOR DIFFUSION SYSTEM
    Shen, Shanping
    He, Pei
    Shang, Mingtao
    Mao Ronghai
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 4B, 2014,
  • [42] Vortex dynamics in the reattaching flow of separation bubbles with variable aspect ratio
    Courtine, S.
    Spohn, A.
    Bonnet, J. P.
    ADVANCES IN TURBULENCE XI, 2007, 117 : 370 - 372
  • [43] Flow dynamics in a swirl combustor
    Grinstein, FF
    Young, TR
    Gutmark, EJ
    Li, GQ
    Hsiao, G
    Mongia, HC
    JOURNAL OF TURBULENCE, 2002, 3
  • [44] Numerical Investigation of Flow Acoustic Coupling in a Half-Dump Combustor
    Ashoke, De
    Abhijit, Kushari
    Sudharsan, K.
    GeethaSri, Konreddy
    JOURNAL OF PROPULSION AND POWER, 2016, 32 (01) : 95 - 107
  • [45] NUMERICAL-CALCULATIONS OF THE FLOW IN ANNULAR COMBUSTOR DUMP DIFFUSER GEOMETRIES
    KOUTMOS, P
    MCGUIRK, JJ
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1989, 203 (05) : 319 - 331
  • [46] Identification of the Cold Flow Perturbation Sources in a Dump Combustor With a Tapered Exit
    Yadav, N. P.
    Kushari, Abhijit
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2013, 135 (01):
  • [47] Flow behavior with an oscillating motion of the impinging jet in a dump diffuser combustor
    Honami, S
    Shizawa, T
    Sato, A
    Ogata, H
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1996, 118 (01): : 65 - 71
  • [48] Reactive Flow Dynamics of Low-Frequency Instability in a Scramjet Combustor
    Jeong, Seung-Min
    Han, Hyung-Seok
    Sung, Bu-Kyeng
    Kim, Wiedae
    Choi, Jeong-Yeol
    AEROSPACE, 2023, 10 (11)
  • [49] EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF ISOTHERMAL SWIRLING FLOW IN AN AXISYMMETRICAL DUMP COMBUSTOR
    FAVALORO, SC
    NEJAD, AS
    AHMED, SA
    JOURNAL OF PROPULSION AND POWER, 1991, 7 (03) : 348 - 356
  • [50] RECOGNIZE THE COLD FLOW PERTURBATION SOURCES IN A DUMP COMBUSTOR WITH TAPER EXIT
    Yadav, N. P.
    Kushari, Abhijit
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE - 2010 - VOL 1, PTS A-C, 2010, : 1011 - 1022