Experimental Study of the Impact of Diesel/Biodiesel Blends Oxidation on the Fuel Injection System

被引:4
|
作者
Ben Amara, Arij [1 ]
Lecointe, Bertrand [1 ]
Jeuland, Nicolas [1 ]
Takahashi, Takuya [2 ]
Iida, Yutaka [2 ]
Hashimoto, Hiromichi [2 ]
Bouilly, Julien [3 ]
机构
[1] IFP Energies Nouvelles, 1&4 Ave Bois Preau, F-92852 Rueil Malmaison, France
[2] Toyota Motor Co Ltd, Toyota, Japan
[3] Toyota Motor Europe NV SA, Toyota, Japan
关键词
FAME; biodiesel; stability; oxidation; Total Acid Number; TAN; fuel injection system; internal deposits; lacquer;
D O I
10.4271/2014-01-2767
中图分类号
U [交通运输];
学科分类号
08 ; 0823 ;
摘要
The stability of Diesel/Biodiesel blends can play an important role in deposits formation inside the fuel injection system (FIS). The impact of the stability of FAME/Diesel fuel blends on lacquer deposits formation and on the behavior and reliability of the FIS was investigated using blends of Rapeseed and Soybean methyl esters (RME, SME) and conventional Diesel fuel (volume fractions of RME and SME range from 0 to 20% v/v). Fuels were aged under accelerated conditions and tested on an injection test rig according to an operating cycle developed to provoke injector needle blocking. The soaking duration was found to affect injector fouling. A relationship between the injector fouling tendency and the fuel stability was established. Under current test condition, injectors fouling increased with fuel oxidation measured with Total-Acid-Number. Needle fouling occurred at a TAN level of 0.25mg KOH/g and needle blocking occurred at a TAN level of 0.5 and 1 mg KOH/g for B20-SME and B20-RME, respectively. The FAME composition and the fuel ageing procedure can have a significant impact on FIS fouling tendency.
引用
收藏
页码:849 / 860
页数:12
相关论文
共 50 条
  • [21] IMPACT OF PHYSICAL PROPERTIES OF MIXTURE OF DIESEL AND BIODIESEL FUELS ON HYDRODYNAMIC CHARACTERISTICS OF FUEL INJECTION SYSTEM
    Filipovic, Ivan M.
    Pikula, Boran D.
    Kepnik, Goran V.
    [J]. THERMAL SCIENCE, 2014, 18 (01): : 143 - 153
  • [22] Experimental Study of the Corrosiveness of Ternary Blends of Biodiesel Fuel
    Milano, Jassinnee
    Umar, Hamdani
    Shamsuddin, A. H.
    Silitonga, A. S.
    Irfan, Osama M.
    Sebayang, A. H.
    Fattah, I. M. Rizwanul
    Mofijur, M.
    [J]. FRONTIERS IN ENERGY RESEARCH, 2021, 9
  • [23] Evaluation of the oxidation stability of diesel/biodiesel blends
    Karavalakis, George
    Stournas, Stamoulis
    Karonis, Dimitrios
    [J]. FUEL, 2010, 89 (09) : 2483 - 2489
  • [24] Oxidation stability of blends of Jatropha biodiesel with diesel
    Jain, Siddharth
    Sharma, M. P.
    [J]. FUEL, 2011, 90 (10) : 3014 - 3020
  • [25] Computational Study of Fuel Temperature Impact on Combustion and Pollutant Emissions of a Diesel Engine Fueled with Diesel-Biodiesel Blends
    Adham, Adam
    Mabsate, El Mostafa
    [J]. PROCEEDINGS OF 2017 INTERNATIONAL RENEWABLE & SUSTAINABLE ENERGY CONFERENCE (IRSEC' 17), 2017, : 527 - 532
  • [26] Impact of Temperature on the Spray Characteristics of Jatropha Curcas Biodiesel and Diesel Fuel Blends
    Deshmukh, Gopal Kumar
    Rehman, Ameenur
    Gupta, Rajesh
    [J]. JOURNAL OF TESTING AND EVALUATION, 2021, 49 (06) : 4317 - 4325
  • [27] IMPACT OF HYDROTREATED VEGETABLE OIL AND BIODIESEL ON PROPERTIES IN BLENDS WITH MINERAL DIESEL FUEL
    Simacek, Pavel
    Soucek, Ivan
    Pospisil, Milan
    Vrtiska, Dan
    Kittel, Hugo
    [J]. THERMAL SCIENCE, 2019, 23 : S1769 - S1777
  • [28] Experimental study on fuel line pressure fluctuation of biodiesel-DME blends in a common-rail injection system
    Hou, Junxing
    Zhang, Huayang
    An, Xiaodong
    [J]. TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2022, 46 (04) : 749 - 759
  • [29] Investigation of the effect of detergent dispersant additives on the oxidation stability of biodiesel, diesel fuel and their blends
    Beck, Adam
    Poelczmann, Gyoergy
    Eller, Zoltan
    Hancsok, Jeno
    [J]. BIOMASS & BIOENERGY, 2014, 66 : 328 - 336
  • [30] The impact of Fischer-Tropsch diesel on the oxidation stability of biodiesel (FAME) blends
    Blignaut, Annalie
    Collier, Lelani
    Pretorius, Marié
    [J]. Journal of ASTM International, 2009, 6 (10):