DETERMINATION OF FLAW-SIZE DISTRIBUTION BY THE CRACK-OFF PROCESS

被引：6

作者：

SANTHANAM, S ^{[1
]}

SHAW, MC ^{[1
]}

机构：

[1] ARIZONA STATE UNIV,DEPT MECH & AEROSP,TEMPE,AZ 85287

来源：

JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 1990年 / 73卷 / 10期

关键词：

brittle materials; cracking; distribution; flaws; pressure;

D O I：

10.1111/j.1151-2916.1990.tb06695.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The crack‐off process is a new alternative to diamond sawing for the cutting of brittle materials. The process involves exposing brittle rods (or plates) to biaxial fluid pressure. Fluid penetration into surface flaws causes fracture at pressures strongly dependent on the severity of the flaws. A method for calculating the probability‐density distribution of surface flaws in a batch of brittle rods, using the crack‐off pressures for a random sample, is presented here. The scatter in the pressure data is a consequence of the statistical nature of surface flaws. Parameters defining the flawsize distribution can hence be deduced from the crack‐off pressure distribution. The method has been tested on two batches of glass rods that have undergone different treatments, with satisfactory results. Copyright © 1990, Wiley Blackwell. All rights reserved

引用

页码：2922 / 2925

页数：4

共 50 条

[31] JOINT ESTIMATION OF THE FLAW SIZE DISTRIBUTION AND POD FUNCTION
Hovey, P.
Meeker, W. Q.
Li, M.
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 28A AND 28B, 2009, 1096 : 1832 - +
[32] Determination of effective flaw size for fatigue life prediction
Kingston, J. G. R.
Muhr, A. H.
CONSTITUTIVE MODELS FOR RUBBER VII, 2012, : 337 - 342
[33] INFLUENCE OF FLAW DENSITY AND FLAW SIZE DISTRIBUTION ON STATIC AND DYNAMIC FATIGUE BEHAVIOR OF GRAPHITE
WILKINS, BJS
JONES, BF
JOURNAL OF MATERIALS SCIENCE, 1973, 8 (09) : 1362 - 1364
[34] Equivalent initial flaw size distribution for notches in 2024-T3 aluminum accounting for short crack effect
Yang, JN
Manning, SD
Newman, JC
STRUCTURAL SAFETY AND RELIABILITY, VOLS. 1-3, 1998, : 1181 - 1188
[35] Equivalent initial flaw size distribution determination for gas turbine blades based upon inspection data
Johnson, W. S.
Wilson, A. C.
Highsmith, S., Jr.
Proceedings of the ASME Turbo Expo 2005, Vol 4, 2005, : 571 - 577
[36] Method of determination of aerosol microparticles' size distribution by iteration process
Bilyi, Alexander I.
Bilyy, Rostyslav O.
Getman, Vasyl' B.
ATMOSPHERIC OPTICAL MODELING, MEASUREMENT, AND SIMULATION II, 2006, 6303
[37] Crack detection flaw size parameter modeling for x-rays at grazing angle to crack faces
Koshti, Ajay M.
NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2017, 2017, 10169
[38] Fatigue Life Prediction Based on Crack Closure and Equivalent Initial Flaw Size
Wang, Qiang
Zhang, Wei
Jiang, Shan
MATERIALS, 2015, 8 (10) : 7145 - 7160
[39] Equivalent initial flaw size distribution in fuselage skin splices
Fawaz, S
Lo, J
Hsu, C
FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 2551 - 2556
[40] ACCOUNTING FOR THE EFFECTS OF INSERVICE INSPECTION FLAW DEPTH SIZING ERRORS IN DEVELOPING FLAW SIZE DISTRIBUTION TABLES
Gosselin, S. R.
Simonen, F. A.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 1605 - 1612

← 1 2 3 4 5 →