Effect of aging time and temperature on the aging behavior in Sn containing AZ91 alloy

被引:1
|
作者
Jeong Kyun Kim
Seung Hyun Oh
Kang Cheol Kim
Won Tae Kim
Do Hyang Kim
机构
[1] Yonsei University,Department of Metallurgical Engineering, Center for Noncrystalline Materials
[2] Cheongju University,Department of Optical Engineering
来源
关键词
aging; precipitation; hardness test; AZ91D; Mg-Al-Zn-Sn;
D O I
暂无
中图分类号
学科分类号
摘要
Effects of aging temperature and time on the aging behavior in AZ91 alloy and Sn containing AZ91 alloy (AZT915) have been investigated in the present study. The mode of precipitation, i.e. discontinuous and continuous precipitation in both alloys is strongly affected by the aging temperature. At low aging temperature of 403 K, only discontinuous precipitation occurs at the grain boundaries, whereas at high aging temperatures of 573 and 623 K only continuous precipitation occurs inside the grains. At intermediate temperature range (443 or 498 K) both discontinuous and continuous precipitation reactions occur. In AZT915, the Mg2Sn particles at the grain boundary effectively reduce the available nucleation sites for discontinuous β precipitates, and slow down the movement of the grain boundary, resulting in suppression of discontinuous precipitation. In addition, increased local lattice strain by the presence of Sn in the α-Mg solid solution matrix accelerates the nucleation of the continuous precipitates at the early stage of aging treatment. Therefore, significantly higher peak hardness can be obtained within a shorter aging time in AZT915.
引用
收藏
页码:308 / 312
页数:4
相关论文
共 50 条
  • [41] Effect of mechanical vibrations on the wear behavior of AZ91 Mg alloy
    Chaturvedi, V.
    Pandel, U.
    Sharma, A.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN METALLURGY, MATERIALS AND MANUFACTURING, 2018, 314
  • [42] Effect of Gd on Microstructure and Fracture Behavior of AZ91 Magnesium Alloy
    Li, Yao
    Yang, Junjie
    Wang, Huiling
    [J]. 4TH ANNUAL INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND ENGINEERING (IWMSE2018), 2018, 381
  • [43] Effect of Pb addition on ageing behavior of AZ91 magnesium alloy
    Srinivasan, A.
    Pillai, U. T. S.
    Pai, B. C.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 : 87 - 92
  • [44] Effect of the eutectic phase mixture on the anodic behavior of alloy AZ91
    Anik, M
    Avci, P
    Tanverdi, A
    Celikyurek, I
    Baksan, B
    Gurler, R
    [J]. MATERIALS & DESIGN, 2006, 27 (05) : 347 - 355
  • [45] Effect of Calcium on the Combustion Behavior of Molten AZ91 Magnesium Alloy
    Kawabata, Hiroyuki
    Yagi, Yusuke
    Aoki, Yuko
    Kato, Hajime
    Kitayama, Koshiro
    Hibi, Kazuma
    [J]. MATERIALS TRANSACTIONS, 2018, 59 (02) : 272 - 279
  • [46] Effects of Sn additions on the microstructure and impression creep behavior of AZ91 magnesium alloy
    Mahmudi, R.
    Moeendarbari, S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 566 : 30 - 39
  • [47] Effect of Holding Time on the Properties of AZ91 Foamed Magnesium Alloy
    Tian, Zhenyun
    Qiu, Guibao
    Cui, Yaoran
    Li, Qingjuan
    [J]. TMS 2022 151ST ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2022, : 796 - 804
  • [48] Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites
    Garcia-Rodriguez, S.
    Torres, B.
    Maroto, A.
    Lopez, A. J.
    Otero, E.
    Rams, J.
    [J]. WEAR, 2017, 390-391 : 1 - 10
  • [49] The influence of initial microstructure and temperature on the deformation behavior of AZ91 magnesium alloy
    Pilehva, F.
    Zarei-Hanzaki, A.
    Fatemi-Varzaneh, S. M.
    [J]. MATERIALS & DESIGN, 2012, 42 : 411 - 417
  • [50] Improving mechanical properties of an AZ91 alloy by properly combining aging treatment and torsion deformation
    Zhu, Yulin
    Liu, Feiya
    Xin, Renlong
    Song, Bo
    Liu, Qing
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 779 (779):