On the modified Reynolds equation model for the prediction of squeeze-film gas damping in a low vacuum

被引:0
|
作者
Roger C. W. Leung
Travis Thurber
Wenjing Ye
机构
[1] The Hong Kong University of Science and Technology,Department of Mechanical Engineering
[2] King Abdullah University of Science and Technology,Department of Mechanical Engineering
[3] KAUST-HKUST Micro/Nanofluidic Joint Laboratory,undefined
来源
关键词
Squeeze-film damping; Microresonator; Reynolds equation model; Monte Carlo simulation; Free-molecule regime;
D O I
暂无
中图分类号
学科分类号
摘要
The Reynolds equation coupled with an effective viscosity model is often employed to predict squeeze-film damping of plate resonators in a low vacuum. Due to the lack of a sound theoretical foundation, a study is carried out to evaluate the performance of such an approach in the free-molecule regime and results are presented in this paper. An experimentally validated Monte Carlo simulation approach for the simulation of air damping is developed and employed for this study. First, effective viscosity models are developed for a parallel-plate resonator and a rotational resonator based on experimental measurements. These models are then coupled with Reynolds equation and employed to simulate air damping of resonators of the same type but with differing dimensions. The results are compared with Monte Carlo simulation results. It has been found that the modified Reynolds equation approach cannot accurately compute air damping for a general class of resonators and hence cannot serve as a predictive tool. The deficiency lies in the effective viscosity model that is assumed to be a function of Knudsen number only. Possible extensions of the modified Reynolds equation approach in the highly rarefied regime are also discussed.
引用
收藏
页码:753 / 762
页数:9
相关论文
共 50 条
  • [41] SQUEEZE-FILM DAMPING OF THE MOTION OF A CONTROL FLAPPER-NOZZLE
    AKERS, A
    LIN, SCJ
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1990, 204 (02) : 109 - 115
  • [42] Analytical and numerical modeling of squeeze-film damping in perforated microstructures
    Nigro, Salvatore
    Pagnotta, Leonardo
    Pantano, Maria F.
    MICROFLUIDICS AND NANOFLUIDICS, 2012, 12 (06) : 971 - 979
  • [43] Evaluation of Squeeze-film Damping Effects in MEMS Perforated Plates
    Nigro, Salvatore
    Pagnotta, Leonardo
    Pantano, Maria F.
    NEW ASPECTS OF FLUID MECHANICS, HEAT TRANSFER AND ENVIRONMENT, 2010, : 314 - +
  • [44] Analytical and numerical modeling of squeeze-film damping in perforated microstructures
    Salvatore Nigro
    Leonardo Pagnotta
    Maria F. Pantano
    Microfluidics and Nanofluidics, 2012, 12 : 971 - 979
  • [45] Squeeze-film air damping of thick hole-plate
    Bao, MH
    Yang, H
    Sun, YC
    Wang, YL
    SENSORS AND ACTUATORS A-PHYSICAL, 2003, 108 (1-3) : 212 - 217
  • [47] The Gas Squeeze Film Characteristics of Acoustic Levitation with Various Excitation Disc Shapes Based on the Modified Reynolds Equation
    Wei, Bin
    Miyatake, M.
    Kawada, S.
    Yoshimoto, S.
    TRIBOLOGY TRANSACTIONS, 2020, 63 (03) : 487 - 493
  • [48] LOAD SUPPORT OF SPHERICAL SQUEEZE-FILM GAS BEARINGS
    BECK, JV
    STRODTMA.CL
    JOURNAL OF LUBRICATION TECHNOLOGY-TRANSACTIONS OF THE ASME, 1969, 91 (01): : 132 - &
  • [49] Squeeze-film air damping of a torsion mirror at a finite tilting angle
    Bao, Minhang
    Sun, Yuanchen
    Zhou, Jia
    Huang, Yiping
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2006, 16 (11) : 2330 - 2335
  • [50] Experimental validation of a squeeze-film damping model based on the direct simulation Monte Carlo method
    Sumali, Hartono
    Epp, David S.
    Torczynski, John R.
    Gallis, Michael A.
    19TH INTERNATIONAL CONFERENCE ON DESIGN THEORY AND METHODOLOGY/1ST INTERNATIONAL CONFERENCE ON MICRO AND NANO SYSTEMS, VOL 3, PART A AND B, 2008, : 719 - 724