Specification of wall boundary conditions and transverse velocity profile conditions in finite element modeling

被引：0
|
作者：
Il Won Seo
Chang Geun Song
机构：
[1] Seoul National University,Department of Civil and Environmental Engineering
来源：
Journal of Hydrodynamics | 2010年 / 22卷
关键词：
wall boundary condition; transverse velocity boundary condition; slip condition; no slip condition; beta distribution;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Present work mainly focuses on the influence of wall boundary conditions and imposition of transverse velocity boundary conditions on the flow field of a bluff body. Uniform velocity over the nodestring is specified in slip condition mode. Three types of transverse velocity profile are adopted for the no slip situation; top hat is same as slip case except for no velocities at wall; parabola for the simple and typical approximation of transverse velocity shape in open channel flow; beta distribution for the general expansion. Assignment of top hat and parabola velocity profiles yields maximum velocity nearby the cylinder while uniform one has maximum magnitude at side walls. Maximum velocity of parabola input is about 44% higher than that of uniform assignment.
引用
收藏
页码：610 / 615
页数：5
相关论文
共 50 条
  • [21] A note on imposing displacement boundary conditions in finite element analysis
    Wu, Baisheng
    Xu, Zhonghai
    Li, Zhengguang
    COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, 2008, 24 (09): : 777 - 784
  • [22] INTERPOLATED BOUNDARY-CONDITIONS IN FINITE-ELEMENT METHOD
    SCOTT, R
    SIAM JOURNAL ON NUMERICAL ANALYSIS, 1975, 12 (03) : 404 - 427
  • [23] Finite element formulation of general boundary conditions for incompressible flows
    Becker, Roland
    Capatina, Daniela
    Luce, Robert
    Trujillo, David
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2015, 295 : 240 - 267
  • [24] MIXED FINITE ELEMENT METHODS FOR PROBLEMS WITH ROBIN BOUNDARY CONDITIONS
    Konno, Juho
    Schoetzau, Dominik
    Stenberg, Rolf
    SIAM JOURNAL ON NUMERICAL ANALYSIS, 2011, 49 (01) : 285 - 308
  • [25] Finite element method for epitaxial growth with thermodynamic boundary conditions
    Bänsch, E
    Hausser, F
    Voigt, A
    SIAM JOURNAL ON SCIENTIFIC COMPUTING, 2005, 26 (06): : 2029 - 2046
  • [26] Effects of boundary conditions on testing of pipes and finite element modelling
    Guarracino, F.
    Walker, A. C.
    Giordano, A.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (2-3) : 196 - 206
  • [27] Open waveguide boundary conditions for finite element modal analysis
    Cucinotta, A
    Selleri, S
    Vincetti, L
    Zoboli, M
    INTEGRATED PHOTONICS RESEARCH, TECHNICAL DIGEST, 2000, 45 : 51 - 53
  • [28] NATURAL BOUNDARY-CONDITIONS IN FINITE-ELEMENT METHOD
    MCLAY, RW
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1972, 39 (04): : 1149 - 1150
  • [29] Finite element simulation of acoustic wave with absorbing boundary conditions
    Zhang, W. (zws@lsec.cc.ac.cn), 1600, Advanced Institute of Convergence Information Technology, Myoungbo Bldg 3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of (04):
  • [30] ON FINITE-ELEMENT IMPLEMENTATION OF IMPEDANCE BOUNDARY-CONDITIONS
    MAYERGOYZ, ID
    BEDROSIAN, G
    JOURNAL OF APPLIED PHYSICS, 1994, 75 (10) : 6027 - 6029
12345