Research on Friction during Hot Deformation of Al-Alloys at High Strain Rate

被引：0
|
作者：
P. Petrov
M. Petrov
E. Vasileva
A. Dubinchin
机构：
[1] Moscow State Technical University “MAMI”,
来源：
International Journal of Material Forming | 2008年 / 1卷
关键词：
interfacial friction; friction factor; aluminium alloy; non-ferrous alloy; isothermal hot forging; lubricant; massive hot forming;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper is linked to the investigation of lubricants for massive hot forging. It was observed temperature range of 200-470°C and screw press was used for tests. The research on friction has been done for Al-Mg and Al-Cu-Mg-Fe-Ni aluminium alloys. In this connection, physical and numerical investigation of friction are performed. On the basis of the ring upsetting technique, the effect of temperature on the friction factor value has been investigated. The regressions for the relationship between friction factor and temperature for all lubricants under study have been obtained. Moreover, the sets of calibration curves were drawn. Each set of calibration curves corresponds to the definite type of aluminium alloy as well as definite conditions of deformation. Some practical recommendations were given.
引用
收藏
页码：1255 / 1258
页数：3
相关论文
共 50 条
  • [21] Response of titanium alloys to high strain rate deformation
    Zakaria, M
    Wu, X
    MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (02) : 225 - 231
  • [22] Effect of Strain Rate on Hydrogen Evolution during Deformation in Al-Zn-Mg Alloys
    Horikawa, Keitaro
    Yamada, Hiroyuki
    Mutsuo, Masahide
    Kobayashi, Hidetoshi
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 295 - +
  • [23] Effect of Strain Rate on Deformation Response of Metastable High Entropy Alloys Upon Friction Stir Processing
    Liu, K.
    Nene, S. S.
    Frank, M.
    Mishra, R. S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (10): : 5043 - 5048
  • [24] Effect of Strain Rate on Deformation Response of Metastable High Entropy Alloys Upon Friction Stir Processing
    K. Liu
    S. S. Nene
    M. Frank
    R. S. Mishra
    Metallurgical and Materials Transactions A, 2020, 51 : 5043 - 5048
  • [25] Influence of temperature and strain rate on the plastic deformation of two commercial high strength Al alloys
    Johansson, Magnus
    Hornqvist, Magnus
    Karlsson, Birger
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 841 - 845
  • [26] High strain rate deformation behavior of Mg-Al-Zn alloys at elevated temperatures
    Watanabe, H.
    Ishikawa, K.
    Mukai, T.
    ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2, 2007, 340-341 : 107 - +
  • [27] INFLUENCE OF CHANGING STRAIN RATE ON MICROSTRUCTURE DURING HOT DEFORMATION
    URCOLA, JJ
    SELLARS, CM
    ACTA METALLURGICA, 1987, 35 (11): : 2649 - 2657
  • [28] Inhibition of abnormal grain growth during hot deformation behavior of friction stir processed 5083 Al alloys
    Garcia-Bernal, M. A.
    Mishra, R. S.
    Verma, R.
    Hernandez-Silva, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 636 : 326 - 330
  • [29] Grain refinement and strain delocalization in TRIP high-entropy alloys during hot deformation
    Tao, Cheng
    Fan, Jiarui
    Wu, Lingyan
    Yi, Hailong
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [30] The motion of high angle grain boundaries in Al and Al-alloys
    Molodov, DA
    Czubayko, U
    Gottstein, G
    Shvindlerman, LS
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 523 - 528
12345