An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

被引：0
|
作者：
Michael Bernhard
Peter Presoly
Christian Bernhard
Susanne Hahn
Sergiu Ilie
机构：
[1] Montanuniversitaet Leoben,Chair of Ferrous Metallurgy
[2] Primetals Technologies Austria GmbH,undefined
[3] Voestalpine Stahl GmbH,undefined
来源：
Metallurgical and Materials Transactions B | 2021年 / 52卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Analytical liquidus equations were evaluated using differential scanning calorimetry (DSC) and differential thermal analysis (DTA). Results of 180 measurements in the Fe-C-Si-Mn-Al-P subsystems were considered, where the experimental methodology was demonstrated for four alloys in the Fe-Si-Mn-Al system. Excellent agreement between the DSC/DTA dataset and the most recently published equation was found (error 2.1 ± 1.6 °C). For this equation, suggested modifications of phosphorus parameters will help to improve calculations for P-alloyed steels.
引用
收藏
页码：2821 / 2830
页数：9
相关论文
共 46 条
  • [21] Thermodynamic Assessment of Liquid Mn-Fe-Si-C-Ca-P System by Unified Interaction Parameter Model
    Han, Pei-Wei
    Zhang, Guo-Hua
    Chu, Shao-Jun
    ISIJ INTERNATIONAL, 2016, 56 (06) : 917 - 925
  • [22] Hot ductility behavior of high-Mn austenitic Fe-22Mn-1.5Al-1.5Si-0.45C TWIP steels microalloyed with Ti and V
    Salas-Reyes, A. E.
    Mejia, I.
    Bedolla-Jacuinde, A.
    Boulaajaj, A.
    Calvo, J.
    Cabrera, J. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 611 : 77 - 89
  • [23] Investigation of the effect of solidification rate on microstructure of Al-0.13Si-0.3Fe DC-cast alloy using EBSD and DSC techniques
    Elsharkawi, Ehab
    MacNeil, Donald
    Mrad, Hatem
    Chen, X. Grant
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2020, 111 (11) : 931 - 937
  • [24] Dew-point controlled oxidataion of Fe-C-Mn-Al-Si-Cu transfarmation-induced plasticity-aided steels
    Li, Xiang Shu
    Baek, Sung-Il
    Oh, Chang-Seok
    Kim, Sung-Joon
    Kim, Young-Woon
    SCRIPTA MATERIALIA, 2008, 59 (03) : 290 - 293
  • [25] Evaluation of the Wear Resistance of Eutectic Coatings of the Fe–Mn–C–B System Alloyed by Si, Ni, and Cr Using Multi-Criteria Analysis
    M. I. Pashechko
    J. Montusiewicz
    Materials Science, 2012, 47 : 813 - 821
  • [26] Plasma Nitriding Behavior of Fe-C-M (M = Al, Cr, Mn, Si) Ternary Martensitic Steels (vol 45, pg 239, 2014)
    Tomio, Yusaku
    Kitsuya, Shigeki
    Oh-Ishi, Keiichiro
    Hono, Kazuhiro
    Miyamoto, Goro
    Furuhara, Tadashi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (01): : 529 - 529
  • [27] Evaluation of the Wear Resistance of Eutectic Coatings of the Fe-Mn-C-B System Alloyed by Si, Ni, and Cr Using Multi-Criteria Analysis
    Pashechko, M. I.
    Montusiewicz, J.
    MATERIALS SCIENCE, 2012, 47 (06) : 813 - 821
  • [28] Thermodynamic modelling of phase equilibria in melts of Fe-Ca-Al-Si-Mn-V-Nb-Ni-Mo-P-C-O system
    Tanklevskaya, N. M.
    Chernova, L. A.
    Mikhaflov, G. G.
    13TH INTERNATIONAL CONFERENCE ON LIQUID AND AMORPHOUS METALS, 2008, 98 : U276 - U279
  • [29] Hot deformation activation energy (QHW) of austenitic Fe-22Mn-1.5Al-1.5Si-0.4C TWIP steels microalloyed with Nb, V, and Ti
    Reyes-Calderon, F.
    Mejia, I.
    Cabrera, J. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 562 : 46 - 52
  • [30] Effect of Intercritical Annealing on Microstructure and Mechanical Properties of Fe-9Mn-0.2C-3Al-0.5Si Medium Manganese Steels Containing Cu and Ni
    Lee, Seung-Wan
    Sin, Seung-Hyuk
    Hwang, Byoungchul
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2020, 30 (01): : 44 - 49
12345