An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

被引：0
|
作者：
Michael Bernhard
Peter Presoly
Christian Bernhard
Susanne Hahn
Sergiu Ilie
机构：
[1] Montanuniversitaet Leoben,Chair of Ferrous Metallurgy
[2] Primetals Technologies Austria GmbH,undefined
[3] Voestalpine Stahl GmbH,undefined
来源：
Metallurgical and Materials Transactions B | 2021年 / 52卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Analytical liquidus equations were evaluated using differential scanning calorimetry (DSC) and differential thermal analysis (DTA). Results of 180 measurements in the Fe-C-Si-Mn-Al-P subsystems were considered, where the experimental methodology was demonstrated for four alloys in the Fe-Si-Mn-Al system. Excellent agreement between the DSC/DTA dataset and the most recently published equation was found (error 2.1 ± 1.6 °C). For this equation, suggested modifications of phosphorus parameters will help to improve calculations for P-alloyed steels.
引用
收藏
页码：2821 / 2830
页数：9
相关论文
共 46 条
  • [1] An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques
    Bernhard, Michael
    Presoly, Peter
    Bernhard, Christian
    Hahn, Susanne
    Ilie, Sergiu
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2021, 52 (05): : 2821 - 2830
  • [2] Determination of liquidus temperatures in high-alloyed Fe–C–Mn–Si–Al steels using differential thermal analysis
    Chang-ling Zhuang
    Jian-hua Liu
    Journal of Iron and Steel Research International, 2018, 25 : 546 - 553
  • [3] Determination of liquidus temperatures in high-alloyed Fe-C-Mn-Si-Al steels using differential thermal analysis
    Zhuang, Chang-ling
    Liu, Jian-hua
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018, 25 (05) : 546 - 553
  • [4] THEORETICAL AND EXPERIMENTAL MODELING OF THE PROCESS OF MELTING COMPLEX ALLOYED STEELS (Fe-Si-Al-Mn)
    Kelamanov, Bauyrzhan
    Kyatbay, Yerbol
    Yerekeyeva, Gaukhar
    Tushyev, Tair
    ACTA METALLURGICA SLOVACA, 2024, 30 (02): : 51 - 56
  • [5] Work hardening behavior of Fe-Mn-Si-Al and Fe-Mn-C TWIP steels
    Jing, H.-T. (jinght@gmail.com), 1600, University of Science and Technology Beijing (35):
  • [6] Effect of Mn, Si, and Sb on High -temperature Oxidation of Fe-Mn-Al-Si-Sb-C Steels
    Park, Soon Yong
    Lee, Dong Bok
    KOREAN JOURNAL OF METALS AND MATERIALS, 2017, 55 (05): : 308 - 314
  • [7] Microstructure and mechanical properties of Al-alloyed Fe-Cr-Ni-Mn-C stainless steels
    Rahimi, R.
    De Cooman, B. C.
    Biermann, H.
    Mola, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 618 : 46 - 55
  • [8] Multicriterion Assessment of Wear Resistance of Fe–Mn–C–B Eutectic Coatings Alloyed with Si, Ni, and Cr
    M. Pashechko
    J. Montusiewicz
    K. Dziedzic
    J. Jozwik
    Powder Metallurgy and Metal Ceramics, 2017, 56 : 316 - 322
  • [9] Magnetic Properties of the Amorphous Fe–P–Si and Fe–P–Si–Mn–V–C Alloys Fabricated from Naturally Alloyed Ferrophosphorus and a 2NSR Alloy
    B. A. Kornienkov
    V. V. Vavilova
    S. V. Simakov
    M. O. Anosova
    Russian Metallurgy (Metally), 2019, 2019 : 721 - 726
  • [10] Multicriterion Assessment of Wear Resistance of Fe-Mn-C-B Eutectic Coatings Alloyed with Si, Ni, and Cr
    Pashechko, M.
    Montusiewicz, J.
    Dziedzic, K.
    Jozwik, J.
    POWDER METALLURGY AND METAL CERAMICS, 2017, 56 (5-6) : 316 - 322
12345