Improvement of Mechanical Properties of Spheroidized 1045 Steel by Induction Heat Treatment

被引：0
|
作者：
Minwook Kim
Jung-Ho Shin
Young Choi
Seok-Jae Lee
机构：
[1] Chonbuk National University,Division of Advanced Materials Engineering, Research Center for Advanced Materials Development
[2] SeAH Besteel,Product Research Center, R&D Center
[3] KITECH,Convergence Components and Agricultural Machinery Application Group, Jeonbuk Regional Division
来源：
Metallurgical and Materials Transactions A | 2016年 / 47卷
关键词：
Cementite; Ferrite Matrix; Cementite Particle; Relative Volume Fraction; Conventional Heat Treatment;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of induction heat treatment on the formation of carbide particles and mechanical properties of spheroidized 1045 steel were investigated by means of microstructural analysis and tensile testing. The induction spheroidization accelerated the formation of spherical cementite particles and effectively softened the steel. The volume fraction of cementite was found to be a key factor that affected the mechanical properties of spheroidized steels. Further tests showed that sequential spheroidization by induction and furnace heat treatments enhanced elongation within a short spheroidization time, resulting in better mechanical properties. This was due to the higher volume fraction of spherical cementite particles that had less diffusion time for particle coarsening.
引用
收藏
页码：1761 / 1769
页数：8
相关论文
共 50 条
  • [31] Localized Laser Heat Treatment on AISI 1045 Steel Using a LPBF Laser
    Ours, Benjamin
    Rehman, Hammad Ur
    Downard, Scott
    Cyders, Timothy
    Wisner, Brian
    ENGINEERING REPORTS, 2025, 7 (01)
  • [32] Effect of heat treatment on the mixed-mode impact behaviour of a 1045 steel
    Manoharan, M
    Seow, HP
    Jin, D
    Hong, BK
    INTERNATIONAL JOURNAL OF FRACTURE, 1997, 86 (03) : L25 - L29
  • [33] Mechanical Properties of AISI 1045 Steel Subjected to Combined Loads of Tension and Torsion
    G. Zhao
    L. Liu
    D. Wang
    J. Guo
    W. Chen
    Experimental Techniques, 2018, 42 : 393 - 406
  • [34] Tempering Effects of Multitrack Laser Surface Heat Treatment of AISI 1045 Steel
    Kung, Chi-Liang
    Shih, Hao-En
    Hsu, Chao-Ming
    Chen, Cheng-Yi
    SENSORS AND MATERIALS, 2019, 31 (03) : 1091 - 1103
  • [35] Improvement in Mechanical Properties and Wear Resistance of 13Cr-4Ni Martensitic Steel by Cyclic Heat Treatment
    Singh, Jai
    Nath, S. K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (10) : 2519 - 2528
  • [36] IMPROVING THE MECHANICAL-PROPERTIES OF SINTERED STEEL BY HEAT-TREATMENT
    KARTASHOVA, LI
    TSYRKIN, AT
    TREGUBOV, VA
    PLAKHOTNIK, VY
    ALESHINA, LI
    METAL SCIENCE AND HEAT TREATMENT, 1985, 27 (9-10) : 728 - 730
  • [37] Effect of heat treatment on microstructure and mechanical properties of plastic mould steel
    Liu Cun-Ping
    Guo Sheng
    Wang Zhi-Hai
    MATERIALS AT HIGH TEMPERATURES, 2010, 27 (02) : 141 - 144
  • [38] Effects of Yttrium and Heat Treatment on the Microstructure and Mechanical Properties of CLAM Steel
    Qiu, Guoxing
    Zhan, Dongping
    Li, Changsheng
    Yang, Yongkun
    Qi, Min
    Jiang, Zhouhua
    Zhang, Huishu
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (01) : 42 - 52
  • [39] Mechanical properties of maraging steel welds after aging heat treatment
    Klobcar, Damjan
    Tusek, Janez
    MATERIALI IN TEHNOLOGIJE, 2007, 41 (04): : 167 - 171
  • [40] Heat Treatment of High Manganese Austenitic Steel: Structural and Mechanical Properties
    M’ghari O.
    Lenda O.B.
    Ibnlfassi A.
    Yassine Y.A.
    Ahmed Y.A.
    Saad E.M.
    Recent Patents on Mechanical Engineering, 2022, 15 (05) : 532 - 538
12345