Effect of Sc and Sr on the Eutectic Si Morphology and Tensile Properties of Al-Si-Mg Alloy

被引：1
|
作者：
Cong Xu
Fang Wang
Hussain Mudassar
Chengyuan Wang
Shuji Hanada
Wenlong Xiao
Chaoli Ma
机构：
[1] Beihang University (BUAA),Key Laboratory of Aerospace Advanced Materials and Performance of Ministry of Education, School of Material Science and Engineering
[2] Tohoku University,Institute for Materials Research
来源：
Journal of Materials Engineering and Performance | 2017年 / 26卷
关键词：
Al-Si-Mg; mechanical properties; microstructure; modification; Sr and Sc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To study the effect of Sc and Sr additions on modifying eutectic silicon particles and mechanical properties for Al-Si-Mg casting alloy, they were added with different amounts in F357 alloy without beryllium addition in the present work. It was found that (0.4 wt.% Sc and 0.04 wt.% Sr)-modified F357 alloy presented the optimal tensile properties when compared with the individual addition of Sc or Sr. This was mainly attributed to the synergic modification of eutectic Si in F357 alloys due to the combined additions of Sc and Sr. The silicon modification mechanisms via Sc and Sr were emphasized to be examined in this paper, and the fracture mechanism of the obtained alloys was also discussed.
引用
收藏
页码：1605 / 1613
页数：8
相关论文
共 50 条
  • [31] Microstructural, mechanical and electrical characterization of directionally solidified Al-Si-Mg eutectic alloy
    Kaygisiz, Yusuf
    Marasli, Necmettin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 : 197 - 203
  • [32] On nanoscale Al precipitates forming in eutectic Si particles in Al-Si-Mg cast alloys
    Jia, Z. H.
    Arnberg, L.
    Andersen, S. J.
    Walmsley, J. C.
    SCRIPTA MATERIALIA, 2009, 61 (05) : 500 - 503
  • [33] Multiscale design of α-Al, eutectic silicon and Mg2Si phases in Al-Si-Mg alloy manipulated by in situ nanosized crystals
    Zhu, Lin
    Qiu, Feng
    Zou, Qian
    Han, Xue
    Shu, Shi-Li
    Yang, Hong-Yu
    Jiang, Qi-Chuan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 802
  • [34] The influence of microstructure on the Bauschinger effect in an Al-Si-Mg casting alloy
    Caceres, CH
    Griffiths, JR
    Reiner, P
    ACTA MATERIALIA, 1996, 44 (01) : 15 - 23
  • [35] Multiscale design of α-Al, eutectic silicon and Mg2Si phases in Al-Si-Mg alloy manipulated by in situ nanosized crystals
    Zhu, Lin
    Qiu, Feng
    Zou, Qian
    Han, Xue
    Shu, Shi-Li
    Yang, Hong-Yu
    Jiang, Qi-Chuan
    Qiu, Feng (qiufeng@jlu.edu.cn); Yang, Hong-Yu (yanghy@just.edu.cn), 1600, Elsevier Ltd (802):
  • [36] Effects of hydrogen and oxides on tensile properties of Al-Si-Mg cast alloys
    Eisaabadi B, G.
    Davami, P.
    Kim, S. K.
    Varahram, N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 36 - 47
  • [37] Effect of flux compositions on grain refinement in Al-Si-Mg alloy
    Limmancevichitr, C
    Eidhed, W
    LIGHT METALS 2005, 2005, : 1107 - 1110
  • [38] Influence of microstructure on the Bauschinger effect in an Al-Si-Mg casting alloy
    Univ of Queensland, Queensland
    Acta Mater, 1 (15-23):
  • [39] Precipitation Sequence in an Al-Si-Mg Foundry Alloy
    Rinderer, Barbara
    Couper, Malcolm
    Xiong, Xiangyuan
    Gao, Sam
    Nie, Jian-Feng
    PRICM 7, PTS 1-3, 2010, 654-656 : 590 - +
  • [40] High strength aluminum cast alloy: A Sc modification of a standard Al-Si-Mg cast alloy
    Muhammad, Arfan
    Xu, Cong
    Xuejiao, Wang
    Hanada, Shuji
    Yamagata, Hiroshi
    Hao, LiRong
    Chaoli, Ma
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 604 : 122 - 126
12345