Printable Highly Stable and Superfast Humidity Sensor Based on Two Dimensional Molybdenum Diselenide

Transition metal dichalcogenides (TMDCs) are promising materials for sensing applications, due to their exceptional high performance in nano-electronics. Inherentely, the chemical and thermal responses of TMDCs are highly stable, hence, they pave way for real time sensor applications. This article proposes inceptively a stable and superfast humidity sensor using two-dimensional (2D) Molybdenum diselenide (MoSe2) through printed technlogies. The 2D MoSe2 ink is synthesized through wet grinding to achieve few-layered nano-flakes. Inter digital electrodes (IDEs) are fabricated via screen-printing on Polyethylene terephthalate (PET) substrate and thin film of MoSe2 nano-flakes is fabricated through spin coating. The impedance and capacitance response are recorded at 1 kHz between temperature levels ranging from 20–30 °C. The impedance and capacitance hysteresis results are recorded <1.98% and <2.36%, respectively, ensuring very good repeatability during humidification and dehumidification. The stability of impedance and capacitance response are recorded with maximum error rate of ~ 0.162% and ~ 0.183%, respectively. The proposed sensor shows fast impedance response time (Tres) of ~ 0.96 s, and recovery time (Trec) of ~ 1.03 s, which has Tres of ~ 1.87 s, and Trec of ~ 2.13 s for capacitance. It is aimed to develop a high performance and stable humidity sensor for various monitoring applications.