A study on the novel micromixer with chaotic flows

被引:0
|
作者
Seung-Hyeon Lee
Ho-Jin Kang
Bumkyoo Choi
机构
[1] Sogang University,Department of Mechanical Engineering
来源
Microsystem Technologies | 2009年 / 15卷
关键词
Electric Charge; Lorentz Force; Unstable Manifold; Helical Flow; Active Mixer;
D O I
暂无
中图分类号
学科分类号
摘要
This paper presents the novel micro mixer with chaotic flow using coupling between Lorentz force and the moving force of the electric charge in an electric field. Rapid mixing is essential for μ-TAS technology, but is often difficult to achieve it at low Reynolds numbers in micro-systems. Although it is effective to mix with a stirrer for rapid mixing in a general macro-system, it is very difficult to fabricate it in a microsystem. Because the chaotic flow plays a role as a stirrer in a mixing chamber, the novel mixer is expected to mix more rapidly than existing micro mixers. The mixer not only has a simple structure compared with existing ones but also is able to achieve high mixing efficiency in spite of low power consumption. In order to estimate the efficiency for each mixer, the analytical expression and the computer simulations are performed. The results about the flow directions and the experimental results with mixing visualization are presented. Through the comparison with the mixing experiment using the diffusion process, we confirm that the proposed mixer with a simpler structure is able to achieve higher mixing efficiency.
引用
收藏
页码:269 / 277
页数:8
相关论文
共 50 条
  • [31] An overlapping crisscross micromixer using chaotic mixing principles
    Wang, Lilin
    Yang, Jing-Tang
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2006, 16 (12) : 2684 - 2691
  • [32] Novel 3-D T-Shaped Passive Micromixer Design with Helicoidal Flows
    Okuducu, Mahmut Burak
    Aral, Mustafa M.
    PROCESSES, 2019, 7 (09)
  • [33] Development of an Injection Molded Disposable Chaotic Micromixer: Serpentine Laminating Micromixer (II) - Fabrication and Mixing Experiment -
    Kim, Dong Sung
    Lee, Se Hwan
    Kwon, Tai Hun
    Aim, Chong H.
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2005, 29 (10) : 1298 - 1306
  • [34] Development of an Injection Molded Disposable Chaotic Micromixer: Serpentine Laminating Micromixer (I) - Design and Numerical Analysis -
    Kim, Dong Sung
    Lee, Se Hwan
    Kwon, Tai Hun
    Ahn, Chong H.
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2005, 29 (10) : 1289 - 1297
  • [35] Chaotic Micromixer Based on 3D Horseshoe Transformation
    Zhang, He
    Li, Xin
    Chuai, Rongyan
    Zhang, Yingjie
    MICROMACHINES, 2019, 10 (06)
  • [36] Experimental study of reactive chaotic flows in tubular reactors
    Boesinger, C
    Le Guer, Y
    Mory, M
    AICHE JOURNAL, 2005, 51 (08) : 2122 - 2132
  • [37] Vertical chaotic mixing of oscillating feedback micromixer in passive mode
    Wang, Wensheng
    Li, Mingxin
    Xu, Cong
    CHEMICAL ENGINEERING SCIENCE, 2022, 263
  • [38] Simulation and optimization of chaotic micromixer using lattice Boltzmann method
    Li, CA
    Chen, TN
    SENSORS AND ACTUATORS B-CHEMICAL, 2005, 106 (02) : 871 - 877
  • [39] Optimized Modular Design and Experiment for Staggered Herringbone Chaotic Micromixer
    Chen, Xueye
    Wang, Xiaolei
    INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2015, 13 (03) : 305 - 309
  • [40] Chaotic vortex micromixer utilizing gas pressure driving force
    Fu, Lung-Ming
    Ju, Wei-Jhong
    Tsai, Chien-Hsiung
    Hou, Hui-Hsiung
    Yang, Ruey-Jen
    Wang, Yao-Nan
    CHEMICAL ENGINEERING JOURNAL, 2013, 214 : 1 - 7