Flow on blades of wells turbine for wave power generation

被引：0

作者：

M. Suzuki

C. Arakawa

机构：

[1] The University of Tokyo,Department of Mechanical Engineering, Graduate School of Engineering

[2] Interfaculty Initiative in Information Studies Graduate School of The University of Tokyo,undefined

来源：

Journal of Visualization | 2006年 / 9卷

关键词：

Flow visualization; Oil Film Method; Wells Turbine; Flow on Blades; Wave Power Generation;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Wells turbine has the cascade whose stagger angle is 90°, namely the blades are perpendicular to the axial velocity. Good performance is required from 0° to 90° angle of attack because the turbine is operated in the oscillating airflow produced with wave energy. Furthermore, very interesting and complex flows are experimentally observed by the oil film method for large angles of attack where the performance is strongly influenced, especially, the self-starting. This paper tries to analyze the mechanism of these three-dimensional flows around the turbine with the flow visualization and the numerical analysis, focusing on the off-design condition.

引用

页码：83 / 90

页数：7

共 50 条

[41] Material Surface Roughness Minimization In Laser Shock Peening of Power Generation Turbine Blades
Fameso, Festus
Desai, Dawood
Kok, Schalk
Armfield, Dylan
Newby, Mark
Glaser, Daniel
INTERNATIONAL CONFERENCE ON ELECTRICAL, COMPUTER AND ENERGY TECHNOLOGIES (ICECET 2021), 2021, : 972 - 978
[42] Power generation enhancement in a horizontal axis wind turbine blade using split blades
Moshfeghi, Mohammad
Hur, Nahmkeon
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 2020, 206 (206)
[43] Research for carbide composite laser cladding on steam turbine blades for geothermal power generation
Yuya N.
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2021, 90 (04): : 259 - 261
[44] STUDIES ON WELLS TURBINE FOR WAVE POWER GENERATOR. (PART 4; STARTING AND RUNNING CHARACTERISTICS IN PERIODICALLY OSCILLATING FLOW).
Inou, Masahiro
Kaneko, Kenji
Setoguchi, Toshiaki
Shimamoto, Katsumi
Bulletin of the JSME, 1986, 29 (250): : 1177 - 1182
[45] A VERTICAL AXIS WAVE TURBINE WITH CUP BLADES
Yang, Yingchen
Diaz, Isaiah
Morales, Misael
Obregon, Pablo
PROCEEDINGS OF THE ASME 34TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2015, VOL 9, 2015,
[46] Computational analysis of performance and flow investigation on wells turbine for wave energy conversion
Dhanasekaran, TS
Govardhan, M
RENEWABLE ENERGY, 2005, 30 (14) : 2129 - 2147
[47] Prediction of Wave Loads on Tidal Turbine Blades
Faudot, Celine
Dahlhaug, Ole Gunnar
TECHNOPORT 2012 - SHARING POSSIBILITIES AND 2ND RENEWABLE ENERGY RESEARCH CONFERENCE (RERC2012), 2012, 20 : 116 - 133
[48] Failure analysis of the guide vanes of the Pico Wave Power Plant Wells turbine
Vieira, M.
Sarmento, A.
Reis, L.
ENGINEERING FAILURE ANALYSIS, 2015, 56 : 98 - 108
[49] Performance of a high-solidity wells turbine for an OWC wave power plant
Gato, LMC
Warfield, V
Thakker, A
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (04): : 263 - 268
[50] SOME TECHNIQUES TO IMPROVE THE OPERATION RANGE OF THE WELLS TURBINE FOR WAVE POWER GENERATOR
RAGHUNATHAN, S
SETOGUCHI, T
KANEKO, K
JSME INTERNATIONAL JOURNAL SERIES II-FLUIDS ENGINEERING HEAT TRANSFER POWER COMBUSTION THERMOPHYSICAL PROPERTIES, 1989, 32 (01): : 71 - 77

← 1 2 3 4 5 →