Application of Four-roll Passes upon Rolling of Nonsymmetrical Flange Channel Sections

被引：0
|
作者：
Oginskii I.K. [1 ]
Smirnov E.N. [2 ]
Kukhar’ V.V. [3 ]
Smirnov A.N. [4 ]
Sklyar V.A. [2 ]
机构：
[1] Zaporizhzhia National University, Zaporizhzhia
[2] Ugarov Technological University, Stary Oskol
[3] Pryazovskyi State Technical University, Mariupol
[4] Physical and Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev
来源：
Steel in Translation | 2021年 / 51卷 / 08期
关键词：
channel; flange profile; four-roll pass; linear rolling mill;
D O I：
10.3103/S0967091221080118
中图分类号：
学科分类号：
摘要：
Abstract: This article describes the operation of four-roll passes for rolling of nonsymmetrical flange channel sections. Transformation reasonability of existing two-high mill stands into universal ones is exemplified by channel section rolling at linear rolling mill. Technology and equipment are developed for fabrication of channel sections using four-roll finishing pass at medium section mill 550. Commercial verification of the proposed technical solutions confirmed their maintainability and reasonability regarding the application of rolling mills of such types fabricating nonsymmetrical flange profiles. © 2021, Allerton Press, Inc.
引用
收藏
页码：564 / 568
页数：4
相关论文
共 27 条
  • [21] Development of a Method for Calculating Metal Deformation in Universal Four-Roll Stands during the Rolling of Asymmetric Rail Profiles
    V. V. Dorofeev
    A. V. Dobryanskii
    A. V. Golovatenko
    D. E. Pervushin
    A. R. Fastykovskii
    Steel in Translation, 2024, 54 (10) : 987 - 995
  • [22] Assessment of Stress–Strain and Thermal State of the Billet during Three- and Four-Roll Screw Rolling and Its Influence on Microstructure Formation
    M. M. Skripalenko
    B. A. Romantsev
    M. N. Skripalenko
    V. S. Yusupov
    V. A. Andreev
    V. P. Kuznetsov
    Steel in Translation, 2024, 54 (12) : 1172 - 1175
  • [23] A correlation-based central difference image correction (CDIC) method and application in a four-roll mill flow PIV measurement
    S. Wereley
    L. Gui
    Experiments in Fluids, 2003, 34 : 42 - 51
  • [24] A correlation-based central difference image correction (CDIC) method and application in a four-roll mill flow PIV measurement
    Wereley, ST
    Gui, L
    EXPERIMENTS IN FLUIDS, 2003, 34 (01) : 42 - 51
  • [25] Design of roll-formed aluminium lipped channel sections with web opening subjected to web crippling under end-two-flange load case
    Alsanat, Husam
    Gunalan, Shanmuganathan
    Gatheeshgar, Perampalam
    Poologanathan, Keerthan
    Thabet, Ahmed Mostafa
    JOURNAL OF BUILDING ENGINEERING, 2022, 48
  • [26] Improvement of surface quality of low-alloy zinc strips upon billet casting into two-roll mold and rolling in four-high mill 400
    Shatalov, R.L.
    Kats, A.M.
    Kudin, M.V.
    Boskhamdzhiev, N.Sh.
    Zisel'man, V.L.
    Drobysheva, Yu.V.
    Tsvetnye Metally, 2002, (10): : 76 - 81
  • [27] Application of deep learning method in web crippling strength prediction of cold-formed stainless steel channel sections under end-two-flange loading
    Fang, Zhiyuan
    Roy, Krishanu
    Ma, Quincy
    Uzzaman, Asraf
    Lim, James B. P.
    STRUCTURES, 2021, 33 : 2903 - 2942
123