Inhibiting growth of the Au0.5Ni0.5Sn4 intermetallic layer in Pb-Sn solder joints reflowed on Au/Ni metallization

被引:0
|
作者
A. M. Minor
J. W. Morris
机构
[1] University of California,Department of Materials Science and Engineering
[2] Center for Advanced Materials,Lawrence Berkeley National Laboratory
来源
关键词
Solder; intermetallic; Au/Ni metallization; AuSn; Ni; Sn; Au; Ni; Sn;
D O I
暂无
中图分类号
学科分类号
摘要
Au/Ni metallization has become increasingly common in microelectronic packaging when Cu pads are joined with Pb-Sn solder. Recent work has shown that a ternary compound with stoichiometry Au0.5Ni0.5Sn4 redeposits onto the interface during aging, compromising the strength of the joint. In the present work the growth of the Au0.5Ni0.5Sn4 layer is documented and methods for inhibiting its growth were investigated. It was determined that multiple reflows, both with and without additional aging, can substantially limit the thickness of the ternary layer.
引用
收藏
页码:1170 / 1174
页数:4
相关论文
共 50 条
  • [41] Effect of electromigration on interfacial reaction in Ni/Sn3.0Ag0.5Cu/Au/Pd/Ni-P flip chip solder joints
    Huang Ming-Liang
    Chen Lei-Da
    Zhou Shao-Ming
    Zhao Ning
    ACTA PHYSICA SINICA, 2012, 61 (19)
  • [42] Wettability and interfacial whiskers of Sn-9Zn-0.5Ga-0.08Nd solder with Sn, SnBi and Au/Ni coatings
    Xue, Peng
    Xue, Song-bai
    Shen, Yi-fu
    Long, Fei
    Zhu, Hong
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2014, 25 (08) : 3520 - 3525
  • [43] Interfacial reactions of Sn-3.5% Ag and Sn-3.5% Ag-0.5% Cu solder with electroless Ni/Au metallization during multiple reflow cycles
    Sharif, A
    Chan, YC
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2005, 16 (03) : 153 - 158
  • [44] Interfacial reactions of Sn-3.5% Ag and Sn-3.5% Ag-0.5% Cu solder with electroless Ni/Au metallization during multiple reflow cycles
    Ahmed Sharif
    Y. C. Chan
    Journal of Materials Science: Materials in Electronics, 2005, 16 : 153 - 158
  • [46] Influence of thermal cycling on the microstructure and shear strength of Sn3.5Ag0.75Cu and Sn63Pb37 solder joints on Au/Ni metallization
    Chen, Hongtao
    Wang, Chunqing
    Li, Mingyu
    Tian, Dewen
    Journal of Materials Science and Technology, 2007, 23 (01): : 68 - 72
  • [47] Influence of thermal cycling on the microstructure and shear strength of Sn3.5Ag0.75Cu and Sn63Pb37 solder joints on Au/Ni metallization
    Chen, Hongtao
    Wang, Chunqing
    Li, Mingyu
    Tian, Dewen
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2007, 23 (01) : 68 - 72
  • [48] Retardation of spalling by the addition of Ag in Sn-Zn-Bi solder with the Au/Ni metallization
    Sharif, A.
    Chan, Y. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 : 686 - 690
  • [49] Effect of Grain Structure and Ni/Au-UBM Layer on Electromigration-Induced Failure Mechanism in Sn-3.0Ag-0.5Cu Solder Joints
    Zhang, Yuanxiang
    Zhang, Jicheng
    Wang, Yong
    Fang, Yike
    MICROMACHINES, 2022, 13 (06)
  • [50] Thermomigration of Cu–Sn and Ni–Sn intermetallic compounds during electromigration in Pb-free SnAg solder joints
    Hsiao-Yun Chen
    Chih Chen
    Journal of Materials Research, 2011, 26 : 983 - 991