Effect of vehicle weight on natural frequencies of bridges measured from traffic-induced vibration

被引:0
|
作者
Chul-Young Kim
Dae-Sung Jung
Nam-Sik Kim
Soon-Duck Kwon
Maria Q. Feng
机构
[1] Myongji University,Dept. of Civil & Envir. Eng.
[2] Hyundai E&C Co. Lid.,Hyundai Institute of Construction Technology
[3] Chonbuk National University,Dept. of Civil Engineering
[4] University of California,Dept. of Civil & Envir. Eng.
关键词
ambient vibration test; traffic induced vibration; vehicle mass; suspension bridge; short-span bridge; dynamic characteristics; natural frequency;
D O I
10.1007/BF02857543
中图分类号
学科分类号
摘要
Recently, ambient vibration test (AVT) is widely used to estimate dynamic characteristics of large civil structures. Dynamic characteristics can be affected by various environmental factors such as humidity, intensity of wind, and temperature. Besides these environmental conditions, the mass of vehicles may change the measured values when traffic-induced vibration is used as a source of AVT for bridges. The effect of vehicle mass on dynamic characteristics is investigated through traffic-induced vibration tests on three bridges; (1) three-span suspension bridge (128m +404m + 128m), (2) five-span continuous steel box girder bridge (59m + 3@95m + 59m), (3) simply supported plate girder bridge (46m). Acceleration histories of each measurement location under normal traffic are recorded for 30 minutes at field. These recorded histories are divided into individual vibrations and are combined into two groups according to the level of vibration ; one by heavy vehicles such as trucks and buses and the other by light vehicles such as passenger cars. Separate processing of the two groups of signals shows that, for the middle and long-span bridges, the difference can be hardly detected, but, for the short span bridges whose mass is relatively small, the measured natural frequencies can change up to 5.4%.
引用
收藏
页码:109 / 115
页数:6
相关论文
共 50 条
  • [11] Theoretical prediction of traffic-induced ground vibration with road filtering effect
    Hao, H.
    Chouw, N.
    Decks, A. J.
    PROCEEDINGS OF THE 3RD INTERNATIONAL SYMPOSIUM ON ENVIRONMENT VIBRATIONS: PREDICTION, MONITORING, MITIGATION AND EVALUATION, ISEV 2007, 2007, : 115 - 122
  • [12] Building vibration to traffic-induced ground motion
    Hao, H
    Ang, TC
    Shen, J
    BUILDING AND ENVIRONMENT, 2001, 36 (03) : 321 - 336
  • [13] Reduction of traffic-induced vibration by soilbags ("donow")
    Matsuoka, H.
    Muramatsu, D.
    Liu, S. H.
    Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Vols 1-5: GEOTECHNOLOGY IN HARMONY WITH THE GLOBAL ENVIRONMENT, 2005, : 1381 - 1384
  • [14] Stochastic modelling of traffic-induced building vibration
    Xu, Y. L.
    Hong, X. J.
    JOURNAL OF SOUND AND VIBRATION, 2008, 313 (1-2) : 149 - 170
  • [15] STOCHASTIC MODELING OF TRAFFIC-INDUCED GROUND VIBRATION
    HUNT, HEM
    JOURNAL OF SOUND AND VIBRATION, 1991, 144 (01) : 53 - 70
  • [16] Human response to traffic-induced vibration of horizontally curved twin I-girder bridges
    Awall, M. R.
    Hayashikawa, T.
    Matsumoto, T.
    He, X.
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012), 2012, : 1045 - 1056
  • [17] Numerical modeling of traffic-induced ground vibration
    Mhanna, Mohannad
    Sadek, Marwan
    Shahrour, Isam
    COMPUTERS AND GEOTECHNICS, 2012, 39 : 116 - 123
  • [18] A STUDY OF THE SPECTRUM OF TRAFFIC-INDUCED BRIDGE VIBRATION
    TURNER, JD
    PRETLOVE, AJ
    JOURNAL OF SOUND AND VIBRATION, 1988, 122 (01) : 31 - 42
  • [19] Development of a numerical model for bridge-vehicle interaction and human response to traffic-induced vibration
    Moghimi, Hassan
    Ronagh, Hamid R.
    ENGINEERING STRUCTURES, 2008, 30 (12) : 3808 - 3819
  • [20] Harvesting traffic-induced vibrations for structural health monitoring of bridges
    Galchev, T. V.
    McCullagh, J.
    Peterson, R. L.
    Najafi, K.
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (10)