Model for Predicting the Lankford Coefficient of Industrial Sheet of Automotive Steels

被引：2

作者：

Vasilyev A.A. ^{[1
]}

Sokolov D.F. ^{[1
]}

Sokolov S.F. ^{[1
]}

Glukhov P.A. ^{[1
]}

Kolbasnikov N.G. ^{[1
]}

Mitrofanov A.V. ^{[2
]}

机构：

[1] Peter the Great St. Petersburg Polytechnic University, St. Petersburg

[2] PAO Severstal, Cherepovets

来源：

Steel in Translation | 2018年 / 48卷 / 2期

关键词：

automotive steel; cold rolling; hot rolling; Lankford coefficient; mathematical modeling; texture;

D O I：

10.3103/S0967091218020146

中图分类号：

学科分类号：

摘要：

A model is proposed for predicting the Lankford coefficient of steel sheet produced for the auto industry at PAO Severstal. The set of empirical model parameters is determined using an experimental database on the mean Lankford coefficient (for 138 strips of 13 steels differing greatly in composition) and additional databases on calculated steel microstructure parameters after hot rolling, and after heat treatment of cold-rolled strips. The mean error in calculations of the Lankford coefficient using the model is 7.1%. It is found that the Lankford coefficient is determined not only by the carbon content in the solid solution before cold rolling but also by the amount of carbon deposited at the ferrite grain boundaries in the form of tertiary cementite. The additional free carbon appearing in the solution when the tertiary cementite particles dissolve on heating of the cold-rolled sheet significantly affects the recrystallization and the texture formation. © 2018, Allerton Press, Inc.

引用

页码：109 / 115

页数：6

共 50 条

[21] A model for predicting the Ms temperatures of steels
Sourmail, T
Garcia-Mateo, C
COMPUTATIONAL MATERIALS SCIENCE, 2005, 34 (02) : 213 - 218
[22] Innovative Development of Al-Zn-Si Coated Sheet Steels for Automotive Applications
Kim, Jong-Sang
Lee, Suk-Kyu
Paik, Doo-Jin
CORROSION SCIENCE AND TECHNOLOGY-KOREA, 2024, 23 (04): : 296 - 301
[23] Investigation of the Conditions of Formation of Aluminum-Magnesium Spinel Inclusions in Low-Carbon Automotive Sheet Steels of 08Yu type and Ultralow-Carbon Automotive Sheet Steels of the if and IF-HS Types
A. I. Zaitsev
A. V. Koldaev
A. B. Stepanov
A. V. Amezhnov
S. F. Dunaev
Metallurgist, 2019, 63 : 841 - 848
[24] Investigation of the Conditions of Formation of Aluminum-Magnesium Spinel Inclusions in Low-Carbon Automotive Sheet Steels of 08Yu type and Ultralow-Carbon Automotive Sheet Steels of the if and IF-HS Types
Zaitsev, A. I.
Koldaev, A. V.
Stepanov, A. B.
Amezhnov, A. V.
Dunaev, S. F.
METALLURGIST, 2019, 63 (7-8) : 841 - 848
[25] Variable friction coefficient model in sheet metal forming
Chabrand, P
Chertier, O
Dubois, F
Martinet, F
SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS, 1998, : 845 - 850
[26] SIMULATION OF DEFORMATION TEXTURE IN UNIAXIAL TRACTION AND CALCULATION OF THE LANKFORD COEFFICIENT R(ALPHA) OF EXTRASOFT SHEET STEEL - APPLICATION TO THE NON-ORTHOTOPIC CASE
CECCALDI, D
YALASEDRATI, F
BAUDIN, T
PENELLE, R
ROYER, F
ACTA METALLURGICA ET MATERIALIA, 1992, 40 (06): : 1177 - 1186
[27] Model for predicting the recrystallized ferrite grain size after annealing of cold-rolled automobile body sheet steels
Vasilyev A.A.
Sokolov S.F.
Zhitelev P.S.
Sokolov D.F.
Kolbasnikov N.G.
Rudskoy A.I.
Russian Metallurgy (Metally), 2018, 2018 (10) : 968 - 972
[28] High speed tensile test of sheet steels for automotive use and axial collapse test of columns
Sumitomo Met, 3 (31-40):
[29] Behaviour model of austenitic stainless steels for automotive structural parts
Santacreu, Pierre-Olivier
Glez, Jean-Christophe
Chinouilh, Guillaume
Froehlich, Thomas
STEEL RESEARCH INTERNATIONAL, 2006, 77 (9-10) : 686 - 691
[30] Influence of Pre-Straining and Bake Hardening on the Strain Rate Sensitivity of Automotive Sheet Steels
Larour, Patrick
Dahmen, Kirsten
Bleck, Wolfgang
STEEL RESEARCH INTERNATIONAL, 2011, 82 (06) : 658 - 670

← 1 2 3 4 5 →