Effect of chromium chloride on the mechanical and dielectric properties of EPDM rubber

被引：0
|
作者：
M. A. Salem
M. A. Khaled
A. M. Hussein
E. Elway
机构：
[1] Azhar University,Physics Department, Faculty of Science
[2] Cairo University,Physics Department, Faculty of Science
来源：
Macromolecular Research | 2003年 / 11卷
关键词：
EPDM rubber; Young’s modulus; Dielectric; a.c. conductivity;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Measurements of Young’s modulus, dielectric loss and a.c. conductivity have been carried out on EPDM rubber samples loaded with different concentrations of CrCl3 (0,2,4 and 6 phr). The values of Young’s modulus was found to be linearly dependent on the CrCl3 content. Variation of the dielectric loss with temperature showed that CrCl3 may act as plasticizer. However, at higher frequencies the dielectric loss was found to be independent of frequency and the rubber samples may behave as non-polar dielectric. Investigations of the a.c conductivity suggested that the conduction in these rubber samples can be described by small polaron tunneling. In addition, conductivity was found to increase with CrCl3 content.
引用
收藏
页码：256 / 259
页数：3
相关论文
共 50 条
  • [21] Effect of Modified EPDM on the Mechanical Properties and Processing of EPDM Containing EPDM Waste
    Carmo, Danielli M.
    Francisco, Vanessa de S.
    Rezende, Carolina G. F.
    Oliveira, Paulo J.
    Zattera, Ademir J.
    Oliveira, Marcia G.
    POLIMEROS-CIENCIA E TECNOLOGIA, 2012, 22 (01): : 22 - 26
  • [22] Effect of Carbon Black on the Mechanical and Dielectric Properties of Rubber Ferrite Composites
    Prema, K. H.
    Kurian, Philip
    Sanoj, M. A.
    Anantharaman, M. R.
    PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 2009, 25 (01) : 57 - 73
  • [23] The Effect of Injection Molding on Physical Properties of EPDM Rubber
    Skrobak, Adam
    Senkerik, Vojtech
    Janostik, Vaclav
    22ND INTERNATIONAL CONFERENCE ON CIRCUITS, SYSTEMS, COMMUNICATIONS AND COMPUTERS (CSCC 2018), 2018, 210
  • [24] Effect of TAC (triallyl cyanorate) on curing characteristics and mechanical properties of silica filled EPDM rubber
    Abtahi, M
    Bakhshandeh, GR
    Farahani, TD
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2006, 45 (02) : 183 - 189
  • [25] Effect of zinc oxide nanoparticles on isothermal cure kinetics, morphology and mechanical properties of EPDM rubber
    Akhlaghi, Shahin
    Kalaee, Mohammadreza
    Mazinani, Saeedeh
    Jowdar, Effat
    Nouri, Ali
    Sharif, Alireza
    Sedaghat, Navid
    THERMOCHIMICA ACTA, 2012, 527 : 91 - 98
  • [26] Recycling of EPDM waste. I. Effect of ground EPDM vulcanizate on properties of EPDM rubber
    Jacob, C
    De, PP
    Bhowmick, AK
    De, SK
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 82 (13) : 3293 - 3303
  • [27] The influence of the injection molding on mechanical properties of EPDM rubber testing samples
    Skrobak, Adam
    Stanek, Michal
    Manas, David
    Ovsik, Martin
    Senkerik, Vojtech
    Reznicek, Martin
    Hylova, Lenka
    PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIAL SCIENCE AND TECHNOLOGY (IMST 2016), 2016, 139 : 411 - 415
  • [28] Characterization of Mechanical and Dielectric Properties of Silicone Rubber
    Cho, Eunyoung
    Chiu, Loraine L. Y.
    Lee, Mitchell
    Naila, Doshina
    Sadanand, Siddharth
    Waldman, Stephen D.
    Sussman, Dafna
    POLYMERS, 2021, 13 (11)
  • [29] DEVULCANIZATION PARAMETERS AND MECHANICAL PROPERTIES OF EPDM/GROUND TIRE RUBBER COMPOUNDS
    Rigotti, Daniele
    Dorigato, Andrea
    Valentini, Francesco
    Pegoretti, Alessandro
    RUBBER CHEMISTRY AND TECHNOLOGY, 2023, 96 (01): : 114 - 129
  • [30] Dielectric and mechanical properties of rubber ferrite composites
    Malini, KA
    Mohammed, EM
    Sindhu, S
    Kurian, P
    Anantharaman, MR
    PLASTICS RUBBER AND COMPOSITES, 2002, 31 (10) : 449 - 457
12345