Influence of temperature on a low-cycle fatigue behavior of a ferritic stainless steel

被引:0
|
作者
S. M. Humayun Kabir
Tae-in Yeo
机构
[1] Chittagong University of Engineering and Technology,Department of Mechanical Engineering
[2] University of Ulsan,School Mechanical and Automotive Engineering
关键词
Dynamic strain ageing; Mechanical properties; Cyclic hardening; Low-cycle fatigue; Fatigue parameter;
D O I
暂无
中图分类号
学科分类号
摘要
The main objective of this study is to reveal the effect of dynamic strain ageing (DSA) on a ferritic stainless steel with detail relation to monotonic and cyclic responses over a wide range of temperatures. For assessing the effect of strain rate on mechanical properties, tensile test results are studied at two different strain rates of 2×10−3/s and 2×10−4/s. Typical responses of this material are compared with other alloy in literatures that exhibits DSA. Serrations in monotonic stress-strain curves and anomalous dependence of tensile properties with temperatures are attributed to the DSA effect. The low cycle fatigue curves exhibit prominent hardening and negative temperature dependence of half-life plastic strain amplitude in temperatures between 300°C–500°C which can be explained by DSA phenomenon. The regime for dependence of marked cyclic hardening lies within the DSA regime of anomalous dependence of flow stress and dynamic strain hardening stress with temperature and negative strain rate sensitivity regime of monotonic response. It is believed that shortened fatigue life observed in the intermediate temperature is mainly due to the adverse effect of DSA. An empirical life prediction model is addressed for as-received material to consider the effect of temperature on fatigue life. The numbers of load reversals obtained from experiment and predicted from fatigue parameter are compared and found to be in good agreement.
引用
下载
收藏
页码:2595 / 2607
页数:12
相关论文
共 50 条
  • [41] ELEVATED-TEMPERATURE LOW-CYCLE FATIGUE BEHAVIOR OF DIFFERENT HEATS OF TYPE-304 STAINLESS-STEEL
    MAIYA, PS
    MAJUMDAR, S
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1977, 8 (11): : 1651 - 1660
  • [42] Low-cycle fatigue behavior of thermal-barrier-coated SUS304 stainless steel at elevated temperature
    Shiozawa, Kazuaki
    Nishino, Seiichi
    Yokoi, Nobuyasu
    Haruyama, Yoshio
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1994, 60 (575): : 1510 - 1516
  • [43] Effects of temperature and strain amplitude on low-cycle fatigue behavior of 12Cr13 martensitic stainless steel
    Zhang, Zhe
    Li, Xiaofei
    Yu, Yaohua
    Li, Bingbing
    Zhang, Bo
    Ma, Yushan
    Chen, Xu
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 1414 - 1427
  • [44] EFFECTS OF MICROSTRUCTURE ON ELEVATED-TEMPERATURE LOW-CYCLE FATIGUE BEHAVIOR OF TYPE-304 STAINLESS-STEEL
    MAIYA, PS
    MAJUMDAR, S
    JOM-JOURNAL OF METALS, 1976, 28 (12): : A40 - A40
  • [45] EFFECTS OF TEMPERATURE ON THE LOW-CYCLE FATIGUE BEHAVIOR OF NITROGEN ALLOYED TYPE 316L STAINLESS-STEEL
    SRINIVASAN, VS
    SANDHYA, R
    RAO, KBS
    MANNAN, SL
    RAGHAVAN, KS
    INTERNATIONAL JOURNAL OF FATIGUE, 1991, 13 (06) : 471 - 478
  • [46] Low-cycle fatigue behavior of 316L-type stainless steel in chloride solutions
    Unigovski, Ya. B.
    Lothongkum, G.
    Gutman, E. M.
    Alush, D.
    Cohen, R.
    CORROSION SCIENCE, 2009, 51 (12) : 3014 - 3020
  • [47] Low-cycle fatigue behavior of stainless-steel elbows having local wall thinning
    Ashiba, Yasuhiro
    Koizumi, Yuu
    Takahashi, Koji
    Hirano, Akihiko
    Takayamagi, Tsuneo
    Fukuhara, Yoshizumi
    Iwamatsu, Fuminori
    MECHANICAL ENGINEERING JOURNAL, 2020, 7 (03):
  • [49] INFLUENCE OF THERMAL AGING ON HIGH-TEMPERATURE, LOW-CYCLE FATIGUE LIFE OF SUS 321 STAINLESS-STEEL
    YAMAGUCHI, K
    KANAZAWA, K
    TRANSACTIONS OF NATIONAL RESEARCH INSTITUTE FOR METALS, 1983, 25 (03): : 143 - 147
  • [50] LOW-CYCLE FATIGUE BEHAVIOR OF NOTCHED AISI-304 STAINLESS-STEEL SPECIMENS
    BAYOUMI, MR
    ELLATIF, AKA
    JOURNAL OF MATERIALS SCIENCE, 1995, 30 (15) : 3944 - 3953