Effect of Manganese on Microstructures and Solidification Modes of Cast Fe-Mn-Si-Cr-Ni Shape Memory Alloys

被引：0

作者：

Huabei Peng

Yuhua Wen

Yangyang Du

Qinxu Yu

Qin Yang

机构：

[1] Sichuan University,The College of Manufacturing Science and Engineering

来源：

Metallurgical and Materials Transactions B | 2013年 / 44卷

关键词：

Austenite; Shape Memory Alloy; Austenitic Stainless Steel; Shape Memory Effect; Equilibrium Phase Diagram;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

We investigated microstructures and solidification modes of cast Fe-(13-27)Mn-5.5Si-8.5Cr-5Ni shape memory alloys to clarify whether Mn was an austenite former during solidification. Furthermore, we examined whether the Creq/Nieq equations (Delong, Hull, Hammer and WRC-1992 equations) and Thermo-Calc software® together with database TCFE6 were valid to predict the solidification modes of cast Fe-(13-27)Mn-5.5Si-8.5Cr-5Ni shape memory alloys. The results have shown that the solidification modes of Fe-(13-27)Mn-5.5Si-8.5Cr-5Ni alloys changed from the F mode to the FA mode with increasing the Mn concentration. Mn is an austenite former during the solidification for the cast Fe-Mn-Si-Cr-Ni shape memory alloys. The Delong, Hull, Hammer, and WRC-1992 equations as well as Thermo-Calc software® together with database TCFE6 are invalid to predict the solidification modes of cast Fe-(13-27)Mn-5.5Si-8.5Cr-5Ni SMAs. To predict the solidification modes of cast Fe-Mn-Si-Cr-Ni alloys, a new Creq/Nieq equation should be developed or the thermodynamic database of Thermo-Calc software® should be corrected.

引用

页码：1137 / 1143

页数：6

共 50 条

[41] Improving the Shape Memory Effect of a Fe-Mn-Si-Cr-Ni Alloy through Shot Peening
Yang, Huanping
Yan, Wenbin
Deng, Xuyang
Zhang, Mengqi
Wang, Yaomian
MATERIALS, 2022, 15 (07)
[42] Effect of nitrogen addition on the microstructure and shape memory properties of Fe-Mn-Si-Cr-Ni based shape memory alloy
Maji, BC
Krishnan, M
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2002, 55 (04): : 265 - 270
[43] Influence of strain aging temperature on shape memory effect of Fe-Mn-Si-Cr-Ni alloy
Department of Materials Shaping and Controlling Engineering, School of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China
不详
Jinshu Rechuli, 2007, 3 (45-47):
[44] The influence and its mechanism of NbC precipitates on the shape memory effect of Fe-Mn-Si-Cr-Ni shape memory alloy
Dong, Z
Liu, W
Chen, J
Wang, D
JOURNAL DE PHYSIQUE IV, 2003, 112 : 389 - 392
[45] On the significance of C and Co on shape memory performance of Fe-Mn-Si-Cr-Ni shape memory alloy
Pan, Ming-Ming
Zhang, Xiao-Ming
Zhou, Ding
Misra, R. D. K.
Chen, Peng
Su, Xiang-Bin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 786
[46] Composition design principles for Fe-Mn-Si-Cr-Ni based alloys with better shape memory effect and higher recovery stress
Wen, YH
Li, N
Xiong, LR
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 407 (1-2): : 31 - 35
[47] Phenomenological Equations for Predicting γ + δ Two-Phase Region of Fe-Mn-Si-Cr-Ni Shape Memory Alloys
Gaixia Wang
Huabei Peng
Linglin Xiang
Jungang Feng
Yuhua Wen
Metallurgical and Materials Transactions A, 2019, 50 : 3478 - 3485
[48] Influence of mechanical alloying on the behavior of Fe-Mn-Si-Cr-Ni shape memory alloys made by powder metallurgy
Pricop, Bogdan
Soyler, Umut
Ozkal, Burak
Lohan, Nicoleta Monica
Paraschiv, Adrian Liviu
Suru, Marius Gabriel
Bujoreanu, Leandru-Gheorghe
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS, 2013, 738-739 : 237 - +
[49] Anomalous cyclic oxidation behaviour of a Fe-Mn-Si-Cr-Ni shape memory alloy
de Sousa Malafaia, Artur Mariano
de Oliveira, Marcelo Falcao
CORROSION SCIENCE, 2017, 119 : 112 - 117
[50] Factors Affecting Transformation Temperatures in Fe-Mn-Si-Cr-Ni Shape Memory Alloy
Yuhua WEN+
Journal of Materials Science & Technology, 2000, (05) : 537 - 539

← 1 2 3 4 5 →