Numerical and experimental investigation on multibody systems with revolute clearance joints

被引：2

作者：

P. Flores

C. S. Koshy

H. M. Lankarani

J. Ambrósio

J. C. P. Claro

机构：

[1] University of Minho,Department of Mechanical Engineering

[2] Wichita State University,Department of Mechanical Engineering

[3] IST/IDMEC,Departamento de Engenharia Mecânica, Instituto Superior Técnico

来源：

Nonlinear Dynamics | 2011年 / 65卷

关键词：

Multibody dynamics; Clearance joints; Contact forces; Dry contact; Experimental test rig;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A comprehensive combined numerical and experimental study on the dynamic response of a slider-crank mechanism with revolute clearance joints is presented and discussed in this paper to provide an experimental verification and validation of the predictive capabilities of the multibody clearance joint models. This study is supported in an experimental work in a test rig, which consists of a slider-crank mechanism with an adjustable radial clearance at the revolute joint between the slider and the connecting rod. The motion of the slider is measured with a linear transducer and an accelerometer. Dynamic tests at different operating crank speeds and with several clearance sizes are performed. The maximum slider acceleration, associated with the impact acceleration, is used as a measure of the impact severity. The obtained results demonstrate the dynamical behavior of a multibody mechanical system with a clearance joint. Finally, the correlation between the numerical and experimental results is presented and discussed leading to validated models of clearance revolute joints.

引用

页码：383 / 398

页数：15

共 50 条

[21] COMPUTATIONAL AND EXPERIMENTAL ANALYSIS OF MECHANICAL SYSTEMS WITH REVOLUTE CLEARANCE JOINTS
Cheriyan, Sony
Flores, Paulo
Lankarani, Hamid M.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 7A, 2014,
[22] Lubricated revolute joints in rigid multibody systems
P. Flores
J. Ambrósio
J. C. P. Claro
H. M. Lankarani
C. S. Koshy
[J]. Nonlinear Dynamics, 2009, 56 : 277 - 295
[23] Lubricated revolute joints in rigid multibody systems
Flores, P.
Ambrosio, J.
Claro, J. C. P.
Lankarani, H. M.
Koshy, C. S.
[J]. NONLINEAR DYNAMICS, 2009, 56 (03) : 277 - 295
[24] AN EXPERIMENTAL INVESTIGATION INTO THE DYNAMIC BEHAVIOR OF REVOLUTE JOINTS WITH VARYING DEGREES OF CLEARANCE
HAINES, RS
[J]. MECHANISM AND MACHINE THEORY, 1985, 20 (03) : 221 - 231
[25] Dynamic analysis of a planar multibody system with multiple revolute clearance joints
Wang, Xupeng
Lin, Wenzhou
Ji, Xiaomin
Gao, Zhu
Bai, Xiaobo
Guo, Yongxin
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, 233 (10) : 3429 - 3443
[26] A new kinematic model for revolute clearance joints with noncircular bushing and pin in planar multibody systems
Liu, Zhe
Zhang, Heng
Meng, Lu
Sun, Yu
Luo, Sihai
Zhou, Liucheng
Li, Pei
[J]. NONLINEAR DYNAMICS, 2024, 112 (15) : 12965 - 12993
[27] Modelling lubricated revolute joints in multibody mechanical systems
Flores, P
Lankarani, HM
Ambrósio, J
Claro, JCP
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 2004, 218 (04) : 183 - 190
[28] Modelling lubricated revolute joints in multibody mechanical systems
Depto. de Engenharia Mecânica, Universidade do Minho, Guimarães, Portugal
不详
不详
不详
[J]. 1600, 183-190 (December 2004):
[29] Modeling and simulation of planar multibody systems with revolute clearance joints considering stiction based on an LCP method
Zheng, Xudong
Zhang, Fei
Wang, Qi
[J]. MECHANISM AND MACHINE THEORY, 2018, 130 : 184 - 202
[30] 3D Revolute Joint with Clearance in Multibody Systems
Akhadkar, Narendra
Acary, Vincent
Brogliato, Bernard
[J]. COMPUTATIONAL KINEMATICS, 2018, 50 : 11 - 18

← 1 2 3 4 5 →