Enhancement of the forced convective heat transfer on mini pin fin heat sinks with micro spiral fins

被引:0
|
作者
Osot Khonsue
机构
[1] Rajamangala University of Technology Isan Sakonnakhon,Department of Mechanical Engineering
来源
Heat and Mass Transfer | 2018年 / 54卷
关键词
D O I
暂无
中图分类号
学科分类号
摘要
This research is an experimental study on the characteristics of heat transfer and pressure drop in mini heat sinks using air as the working fluid. The experiments were performed under a constant heat flux ranging from 9.132–13.698 kW/m2 and the air Reynolds number range 322–1982. Three different types of mini heat sinks were rectangle pin fins, cylindrical pin fins, and spiral pin fins with 36x28x9 mm and 5 mm fins high. There were 63 fins altogether and all were made of aluminum. The results showed that the characteristics of the temperature of heat sink of spiral pin fins was the least. Meanwhile the average heat transfer coefficient and Nusselt number of spiral pin fins were the most. Regarding the pressure drop, the rectangular pin fins was the least. The results of this study can be used to guide the design and development of electronic devices cooling system with forced convective heat transfer for higher performance in the future.
引用
收藏
页码:563 / 570
页数:7
相关论文
共 50 条
  • [21] Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins
    Cao, Xin
    Liu, Huan-ling
    Shao, Xiao-dong
    Shi, Hang-bo
    [J]. APPLIED THERMAL ENGINEERING, 2022, 211
  • [22] A machine learning approach for predicting heat transfer characteristics in micro-pin fin heat sinks
    Kim, Kiwan
    Lee, Haeun
    Kang, Minsoo
    Lee, Geonhee
    Jung, Kiwook
    Kharangate, Chirag R.
    Asheghi, Mehdi
    Goodson, Kenneth E.
    Lee, Hyoungsoon
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 194
  • [23] Experimental Study of Water Flow and Heat Transfer in Silicon Micro-Pin-Fin Heat Sinks
    Xu, Fayao
    Wu, Huiying
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2018, 140 (12):
  • [24] Multimodal machine learning for predicting heat transfer characteristics in micro-pin fin heat sinks
    Lee, Haeun
    Lee, Geonhee
    Kim, Kiwan
    Kong, Daeyoung
    Lee, Hyoungsoon
    [J]. CASE STUDIES IN THERMAL ENGINEERING, 2024, 57
  • [25] Heat transfer enhancement from enclosed discrete components using pin-fin heat sinks
    Yu, E
    Joshi, Y
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (25) : 4957 - 4966
  • [26] Flow and Heat Transfer Characteristics across circular-shaped micro pin fin heat sinks
    Xia, Guo-Dong
    Luo, Guang-Liang
    Li, Yan-Jun
    Yang, Lu-Wei
    [J]. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2009, 30 (04): : 621 - 624
  • [27] Heat transfer of nanofluids in the mini-rectangular fin heat sinks
    Naphon, Paisarn
    Nakharintr, Lursukd
    [J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 40 : 25 - 31
  • [28] Modified hexagonal pin fins for enhanced thermal-hydraulic performance of micro-pin fin heat sinks
    Roozbehi, Ahmad Reza
    Targhi, Mohammad Zabetian
    Heyhat, Mohammad Mahdi
    Khatibi, Ala
    [J]. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2023, 33 (08) : 2902 - 2926
  • [29] EXPERIMENTAL AND NUMERICAL ANALYSIS OF CONVECTIVE HEAT TRANSFER FROM NOTCHED FIN ARRAYS WITH PIN FINS
    Dingare, Sunil V.
    Sane, Suneeta S.
    Kawade, Aniket H.
    Kulkarni, Hrishikesh N.
    Suranglikar, Kaustibh U.
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 8B, 2014,
  • [30] Investigation on heat transfer characteristics of tapered cylinder pin fin heat sinks
    Naphon, Paisarn
    Sookkasem, Anusorn
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2007, 48 (10) : 2671 - 2679