Condensation heat transfer and pressure drop characteristics of R-290, R-600a, R-134a and R-22 in horizontal tubes

被引:0
|
作者
Ho-Saeng Lee
Chang-Hyo Son
机构
[1] Pukyong National University,Department of Refrigeration and Air
来源
Heat and Mass Transfer | 2010年 / 46卷
关键词
Heat Transfer Coefficient; Mass Flux; Tube Diameter; Annular Flow; Heat Transfer Coefficient;
D O I
暂无
中图分类号
学科分类号
摘要
This paper presents the experimental results of condensation heat transfer coefficients of hydrocarbon (HC) refrigerants R-290 and R-600a, hydrochlorofluorocarbon (HCFC) refrigerant R-22, and hydrofluorocarbon (HFC) refrigerant R-134a in a horizontal double-pipe heat exchanger having pipe inner diameters of 10.07, 7.73, 6.54, and 5.80 mm. The condensation process experiments were conducted at mass flux of 35.5–210.4 kg/m2 s and condensation temperature of 40°C. The main results were summarized as follows: The average condensation heat transfer coefficients of R-290 and R-600a were higher than those of R-22 and R-134a. The pressure drops of the four refrigerants were in the order of R-600a > R-290 > R-134a > R-22. The pressure drops of R-600a, R-290, R-134a, and R-22 were approximately 6–15, 9.8–12.5, 4.3–6.7, and 2.1–4.6% higher, respectively, in the 10.7 mm diameter tubes compared to the 5.80 mm diameter tubes. Comparing the condensation heat transfer coefficients of our experimental results with those of other correlations, our experimental data in all the test tubes coincided best with that of Haraguchi et al.
引用
下载
收藏
页码:571 / 584
页数:13
相关论文
共 50 条
  • [41] Condensation heat transfer and flow characteristics of R-134a flowing through corrugated tubes
    Laohalertdecha, Suriyan
    Wongwises, Somchai
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (11-12) : 2673 - 2682
  • [42] Condensation heat transfer and pressure drop characteristics of R-134a flowing through dimpled tubes with different helical and dimpled pitches
    Aroonrat, Kanit
    Wongwises, Somchai
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 121 : 620 - 631
  • [43] Pool boiling of R-22, R-124 and R-134a on a plain tube
    Chiou, CB
    Lu, DC
    Wang, CC
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1997, 40 (07) : 1657 - 1666
  • [44] Single-phase heat transfer and pressure drop performance in smooth tubes with R-22, R-134a, R-407C, and R-410A at superheated conditions with lubricant mixtures (RP-1067)
    Eckels, SJ
    Holthaus, GD
    HVAC&R RESEARCH, 2004, 10 (04): : 421 - 440
  • [45] Experimental evaluation Mechanical performance of the compressor with mixed refrigerants R-290 and R-600a
    Pilla, Tejaswi Saran
    Sunkari, Pranay Kumar Goud
    Padmanabhuni, Sai Laahiri
    Nair, Sachu Sasidharan
    Dondapati, Raja Sekhar
    INTERNATIONAL CONFERENCE ON RECENT ADVANCEMENT IN AIR CONDITIONING AND REFRIGERATION, RAAR 2016, 2017, 109 : 113 - 121
  • [46] Condensation heat transfer of R134a, R1234ze(E) and R290 on horizontal plain and enhanced titanium tubes
    Ji, Wen-Tao
    Chong, Guo-Hun
    Zhao, Chuang-Yao
    Zhang, Hu
    Tao, Wen-Quan
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2018, 93 : 259 - 268
  • [47] Binary and ternary blends of R-134a as alternative refrigerants to R-22
    Stegou-Sagia, A
    Damanakis, M
    ENERGY CONVERSION AND MANAGEMENT, 2000, 41 (13) : 1345 - 1359
  • [48] PERFORMANCE EVALUATION OF 2 AZEOTROPIC REFRIGERANT MIXTURES OF HFC-134A WITH R-290 (PROPANE) AND R-600A (ISOBUTANE)
    KIM, MS
    MULROY, WJ
    DIDION, DA
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 1994, 116 (02): : 148 - 154
  • [49] Experimental study of evaporation pressure drop characteristics of refrigerants R-134a and R-407C in horizontal small tubes
    Lie, Y. M.
    Su, F. Q.
    Lai, R. L.
    Lin, T. F.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (1-2) : 294 - 301
  • [50] Evaporation and condensation heat transfer and pressure drop of R410A and R22 inside internally enhanced horizontal tubes
    Wu, Yong-Qiang
    Luo, Zhong
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2006, 27 (02): : 292 - 294