Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires

被引：1

作者：

G. R. Mirshekari

A. Saatchi

A. Kermanpur

S. K. Sadrnezhaad

机构：

[1] Isfahan University of Technology,Department of Materials Engineering

[2] University of Wisconsin-Madison,Department of Materials Science and Engineering

[3] Sharif University of Technology,Department of Materials Science and Engineering

来源：

Journal of Materials Engineering and Performance | 2016年 / 25卷

关键词：

corrosion behavior; laser welding; mechanical properties; NiTi shape memory alloy; post weld heat treatment; stainless steel;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Effects of post weld heat treatment (PWHT) on mechanical properties and corrosion behavior of NiTi shape memory wire, laser welded to the 304 stainless steel wire were investigated. The results showed that PWHT at 200 °C increased corrosion resistance and tensile strength of the joint up to ~1.8 times that of the as-weld joint, with no heat treatment. On the contrary, precipitation of neoteric intermetallic compounds like Fe2Ti, Cr2Ti, FeNi, Ni3Ti, and Ti2Ni in the welded region deteriorated these properties, when PWHT was conducted at 400 °C. Due to the vital effects of the PWHT performed after the laser welding, careful control of the PWHT temperature was found to be a prerequisite for achievement of desirable properties in the dissimilar NiTi-304 stainless steel laser-welded wires.

引用

页码：2395 / 2402

页数：7

共 50 条

[41] Heat treatment improved the corrosion resistance of laser-welded joints of SK5 steel with the notch effect
Lin, Chien-Hung
Teng, Pei-Jing
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2022, 17 (12):
[42] Effect of Post-Weld Heat Treatment on Microstructure and Hardness of Laser Beam Welded 17-4 PH Stainless Steel
Tuz, Lechoslaw
Sokolowski, Lukasz
Stano, Sebastian
MATERIALS, 2023, 16 (04)
[43] Effect of a brief post-weld heat treatment on the microstructure evolution and pitting corrosion of laser beam welded UNS S31803 duplex stainless steel
Yang, Yanze
Wang, Zhiyu
Tan, Hua
Hong, Jufeng
Jiang, Yiming
Jiang, Laizhu
Li, Jin
CORROSION SCIENCE, 2012, 65 : 472 - 480
[44] Three-dimensional chemical analysis of laser-welded NiTi-stainless steel wires using a dual-beam FIB
Burdet, P.
Vannod, J.
Hessler-Wyser, A.
Rappaz, M.
Cantoni, M.
ACTA MATERIALIA, 2013, 61 (08) : 3090 - 3098
[45] A study on the corrosion fatigue behaviour of laser-welded shape memory NiTi wires in a simulated body fluid
Chan, Chi-Wai
SURFACE & COATINGS TECHNOLOGY, 2017, 320 : 574 - 578
[46] Effect of post weld heat treatment on the interface microstructure of explosively welded titanium/stainless steel composite clad
Sartangi, Pezhman Farhadi
Mousavi, Seiyed Ali Asghar Akbari
ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 29 - 32
[47] Influence of heat treatment on the fatigue life of a laser-welded NiTi alloy wire
Yan, X. J.
Yang, D. Z.
Liu, X. P.
MATERIALS CHARACTERIZATION, 2007, 58 (03) : 262 - 266
[48] Effect of post-weld heat treatment on microstructure evolution and pitting corrosion resistance of electron beam-welded duplex stainless steel
Zhang, Zhiqiang
Jing, Hongyang
Xu, Lianyong
Han, Yongdian
Zhao, Lei
Lv, Xiaoqing
CORROSION SCIENCE, 2018, 141 : 30 - 45
[49] Effect of 0.1 wt% N on the pitting and stress corrosion cracking behaviour of as welded and post weld heat treated austenitic stainless steel weld
Nage, DD
Mhaiskar, AG
Raman, R
Raja, VS
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2004, 57 (02) : 123 - 132
[50] Influence of Nickel on the Microstructure, Mechanical Properties, and Corrosion Resistance of Laser-Welded Super-Duplex Stainless Steel
da Cruz Junior, E. J.
Gallego, J.
Settimi, A. G.
Gennari, C.
Zambon, A.
Ventrella, V. A.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (04) : 3024 - 3032

← 1 2 3 4 5 →