Evaluation of the mechanical behavior of fused deposition modeling (FDM)-printed virgin and recycled PLA parts using factorial design

被引：0
|
作者：
S. L. Rodríguez-Reyna
J. H. Díaz-Aguilera
J. P. García-Contreras
Fidencio Tapia
机构：
[1] Universidad Autónoma de Luis Potosí,Facultad de Ingeniería
[2] Universidad Autónoma de Nuevo León,Instituto de Ingeniería Civil
[3] Universidad Panamericana,Facultad de Ingeniería
来源：
MRS Advances | 2024年 / 9卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：187 / 192
页数：5
相关论文
共 50 条
  • [21] Redesign of a Metallic Component Using Polylactic Acid - PLA by Fused Deposition Modeling - FDM for Durability Increase
    Jiga, Gabriel
    Crunteanu, Daniel-Eugeniu
    Dobrescu, Tiberiu Gabriel
    Braileanu, Patricia Isabela
    Pascu, Nicoleta Elisabeta
    [J]. MACROMOLECULAR SYMPOSIA, 2022, 405 (01)
  • [22] Use of Data Mining Techniques for the Prediction of Surface Roughness of Printed Parts in Polylactic Acid (PLA) by Fused Deposition Modeling (FDM): A Practical Application in Frame Glasses Manufacturing
    Molero, Esther
    Jesus Fernandez, Juan
    Rodriguez-Alabanda, Oscar
    Guerrero-Vaca, Guillermo
    Romero, Pablo E.
    [J]. POLYMERS, 2020, 12 (04)
  • [23] Correlation Between Process Parameters and Mechanical Properties in Parts Printed by the Fused Deposition Modeling Process
    Attoye, Samuel
    Malekipour, Ehsan
    El-Mounayri, Hazim
    [J]. MECHANICS OF ADDITIVE AND ADVANCED MANUFACTURING, VOL 8, 2019, : 35 - 41
  • [24] Effects of laser polishing on surface quality and mechanical properties of PLA parts built by fused deposition modeling
    Chen, Lan
    Zhang, Xinzhou
    Gan, Shuyuan
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2020, 137 (03)
  • [25] The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling
    Algarni, Mohammed
    [J]. POLYMERS, 2021, 13 (02) : 1 - 12
  • [26] Effects of laser polishing on surface quality and mechanical properties of PLA parts built by fused deposition modeling
    Chen, Lan
    Zhang, Xinzhou
    Gan, Shuyuan
    [J]. Journal of Applied Polymer Science, 2020, 137 (03):
  • [27] Impact of temperature and material variation on mechanical properties of parts fabricated with fused deposition modeling (FDM) additive manufacturing
    Sehhat, M. Hossein
    Mahdianikhotbesara, Ali
    Yadegari, Farzad
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (7-8): : 4791 - 4801
  • [28] Impact of temperature and material variation on mechanical properties of parts fabricated with fused deposition modeling (FDM) additive manufacturing
    M. Hossein Sehhat
    Ali Mahdianikhotbesara
    Farzad Yadegari
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 120 : 4791 - 4801
  • [29] Assessing the Effect of Infill Percentage on Detectability of Defects Created in Polymer Parts Printed by the Fused Deposition Modeling (FDM) Using Sheared Laser Interferometry
    M. Tizmaghz Nejad
    D. Akbari
    M. Hasani
    F. Poyan Moghadam
    [J]. Experimental Techniques, 2024, 48 : 41 - 49
  • [30] Assessing the Effect of Infill Percentage on Detectability of Defects Created in Polymer Parts Printed by the Fused Deposition Modeling (FDM) Using Sheared Laser Interferometry
    Nejad, M. Tizmaghz
    Akbari, D.
    Hasani, M.
    Moghadam, F. Poyan
    [J]. EXPERIMENTAL TECHNIQUES, 2024, 48 (01) : 41 - 49
12345