Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys

被引：0

作者：

J. Slota

M. Šiser

M. Dvorák

机构：

[1] Technical University of Košice,

[2] Faculty of Mechanical Engineering,undefined

[3] Institute of Material and Technological Engineering,undefined

[4] Brno University of Technology,undefined

[5] Faculty of Mechanical Engineering,undefined

来源：

Strength of Materials | 2017年 / 49卷

关键词：

finite element method (FEM); ANSYS; clinching; three sheets; steel; mechanical joining;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Presented work deals with springback behavior of two different aluminum alloys, one falling into 5th series (AW-5754 H22) with a thickness of 0.8 mm and other from 6th series (AW-6082 T6) with 1.0 mm thickness. These materials are used for their various applications and hardening process. The springback behavior was investigated by U-bending test. Bending tool was graduated jig with rollers and experiment was performed on R11 and R17 radii. The first series of specimens were oriented in a parallel direction and the other in a direction perpendicular to the rolling direction. Experimental results were measured with MATLAB measuring method and compared with finite element calculation carried out in PAM-STAMP. Influence of different yield functions was also examined.

引用

页码：565 / 574

页数：9

共 50 条

[41] Experimental and numerical analysis of an impacted thin aluminum plate
Gavrus, A
Grolleau, V
Diot, S
STRUCTURES UNDER SHOCK AND IMPACT VII, 2002, 11 : 477 - 486
[42] Experimental and numerical analysis of scarf aluminum adhesive joints
Silva, D. F. O.
Campilho, R. D. S. G.
Silva, F. J. G.
Carvalho, U. T. F.
28TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2018): GLOBAL INTEGRATION OF INTELLIGENT MANUFACTURING AND SMART INDUSTRY FOR GOOD OF HUMANITY, 2018, 17 : 705 - 712
[43] Laser micro-welding of aluminum alloys: experimental studies and numerical modeling
Rohde, Magnus
Markert, Christine
Pfleging, Wilhelm
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 50 (1-4): : 207 - 215
[44] Laser micro-welding of aluminum alloys: experimental studies and numerical modeling
Magnus Rohde
Christine Markert
Wilhelm Pfleging
The International Journal of Advanced Manufacturing Technology, 2010, 50 : 207 - 215
[45] Numerical and Experimental Studies of Strength Characteristics of Aluminum Alloys under Penetration of a Barrier
Bilalov, Dmitry
Sokovikov, Mikhail
Bayandin, Yuri
Chudinov, Vasiliy
Oborin, Vladimir
Naimark, Oleg
MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2016), 2016, 1785
[46] Numerical and experimental investigation of mixed-mode crack growth in aluminum alloys
Amato, Daniele
Yarullin, Rustam
Shlyannikov, Valery
Citarella, Roberto
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (10) : 2854 - 2872
[47] Numerical and experimental investigation for formability of friction stir welded dissimilar aluminum alloys
Noh, W.
Song, J. H.
Jang, I. J.
Gwak, S. H.
Kim, C.
Jung, C. Y.
INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE, 2018, 418
[48] Numerical and experimental analysis on the influence of surface layer on the resistance spot welding process for the aluminum alloys 5182 and 6016
Heilmann, Stefan
Koeberlin, David
Merx, Marcel
Mueller, Jens
Zschetzsche, Joerg
Ihlenfeldt, Steffen
Fuessel, Uwe
WELDING IN THE WORLD, 2019, 63 (05) : 1205 - 1220
[49] Numerical and experimental analysis on the influence of surface layer on the resistance spot welding process for the aluminum alloys 5182 and 6016
Stefan Heilmann
David Köberlin
Marcel Merx
Jens Müller
Jörg Zschetzsche
Steffen Ihlenfeldt
Uwe Füssel
Welding in the World, 2019, 63 : 1205 - 1220
[50] Experimental study of springback behavior in incremental bending process
Zhang, Feifei
Ruan, Jianbin
Zhang, Ji
He, Kai
Du, Ruxu
PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 1290 - 1297

← 1 2 3 4 5 →