Large core optical elastomer splitter fabricated by using 3D printing pattern

被引:0
|
作者
Vaclav Prajzler
Jakub Zavřel
机构
[1] Czech Technical University in Prague,Department of Microelectronics, Faculty of Electrical Engineering
来源
Optical and Quantum Electronics | 2021年 / 53卷
关键词
Optical splitter; Large core waveguides; Optical elastomers; Beam propagation method; Stereolithography 3D printing technology;
D O I
暂无
中图分类号
学科分类号
摘要
The design, fabrication and properties of the large core 1 × 2Y optical planar splitter using optical elastomers for its cladding and core is demonstrated. The splitters were designed by using the beam propagation method, optimized for the operation wavelength of 650 nm. The splitters were fabricated using an epoxy polymer pattern, fabricated by Stereolithography 3D printing technology. The dimensions of the splitters were optimized for assembling an optical fiber with a core diameter of 500 µm. The splitter shows optical losses around 1.48 dB at 650 nm, 1.18 dB at 850 nm, 1.82 dB at 1300 nm and 2.12 dB at 1550 nm.
引用
收藏
相关论文
共 50 条
  • [21] Hollow Core Terahertz Waveguide Fabricated using a 3D Printer
    Yudasari, Nurfina
    Vogt, Dominik
    Anthony, Jessienta
    Leonhardt, Rainer
    2014 39TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ), 2014,
  • [22] Replace wooden pattern to polymer pattern by 3D printing
    Singh, Gurmeet
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 2453 - 2457
  • [23] Large-scale hollow-core 3D printing (HC3DP): A polymer 3D printing technology for large-scale ultralightweight components
    Leschok, Matthias
    Reiter, Lex
    Dillenburger, Benjamin
    ADDITIVE MANUFACTURING, 2023, 78
  • [24] Optical anisotropy of transparent polymer materials fabricated via 3D printing and their application in photoelasticity
    Ren, Zhangyu
    Ju, Yang
    OPTICAL MATERIALS, 2023, 138
  • [25] Total Body Irradiation with a Compensator Fabricated Using a 3D Optical Scanner and a 3D Printer
    Park, S.
    Choi, C.
    Chun, M.
    Kim, J.
    Han, J.
    Cho, J.
    Kim, Y.
    Park, J.
    MEDICAL PHYSICS, 2017, 44 (06) : 3150 - 3150
  • [26] Total body irradiation with a compensator fabricated using a 3D optical scanner and a 3D printer
    Park, So-Yeon
    Kim, Jung-In
    Joo, Yoon Ha
    Lee, Jung Chan
    Park, Jong Min
    PHYSICS IN MEDICINE AND BIOLOGY, 2017, 62 (09): : 3735 - 3756
  • [27] The 3D printing of dielectric elastomer films assisted by electrostatic force
    Wang, Yuhao
    Zhou, Yanfen
    Li, Wenyue
    Liu, Zhanxu
    Zhou, Bangze
    Wen, Shipeng
    Jiang, Liang
    Chen, Shaojuan
    Ma, Jianwei
    Betts, Anthony
    Jerrams, Stephen
    Zhou, Fenglei
    SMART MATERIALS AND STRUCTURES, 2021, 30 (02)
  • [28] 3D printing super stretchable propylene-based elastomer
    Bayati, Abbas
    Rahmatabadi, Davood
    Ghasemi, Ismaeil
    Khodaei, Mohammad
    Baniassadi, Majid
    Abrinia, Karen
    Baghani, Mostafa
    MATERIALS LETTERS, 2024, 361
  • [29] TRIBOLOGICAL PROPERTIES OF THERMOPLASTIC ELASTOMER USED IN 3D PRINTING TECHNOLOGY
    Lesniewski, Tadeusz
    Wieleba, Wojciech
    Krawczyk, Justyna
    Biernacki, Krzysztof
    Opalka, Mariusz
    Aldabergenova, Tamara
    AVIATION, 2024, 28 (02) : 49 - 53
  • [30] Fit of interim crowns fabricated using photopolymer-jetting 3D printing
    Mai, Hang-Nga
    Lee, Kyu-Bok
    Lee, Du-Hyeong
    JOURNAL OF PROSTHETIC DENTISTRY, 2017, 118 (02): : 208 - 215