Microstructure and Properties of 5083 Al/1060 Al/AZ31 Composite Plate Fabricated by Explosive Welding

被引：0
|
作者：
Suyuan Yang
Jiawei Bao
机构：
[1] Beijing Institute of Technology,School of Materials Science and Engineering
来源：
Journal of Materials Engineering and Performance | 2018年 / 27卷
关键词：
explosive welding; magnesium alloy; microstructure; property;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A 5083 Al/1060 Al/AZ31 composite plate was fabricated by explosive welding. The microstructure and properties of the composite plate were investigated after explosive welding. The results showed that all bonding interfaces were wavy interfaces. With an increasing distance from the detonation point, the wavelength and the amplitude also increased. The EDS results indicated that a 5-μm diffusion layer was observed at the 1060 Al/AZ31 layer, including the Mg2Al3 phase. Adiabatic shear bands and twin structures were observed in AZ31. The shear bond strength of the 5083 Al/1060 Al interface was 60 MPa, and the shear bond strength of the 1060 Al/AZ31 interface was 84 MPa.
引用
收藏
页码：1177 / 1184
页数：7
相关论文
共 50 条
  • [21] Cavity growth rate in superplastic 5083 Al and AZ31 Mg alloys
    Yasumasa Chino
    Hajime Iwasaki
    Mamoru Mabuchi
    Journal of Materials Research, 2004, 19 : 3382 - 3388
  • [22] Microstructure and corrosion properties of the laser cladding Al-TiC composite coating on AZ31 magnesium alloy
    Liu F.
    Ning X.
    Bai Y.
    Shen Z.
    Chen H.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (02): : 959 - 969
  • [23] Vacuum hot pressed AZ31/UCF/AZ31 composite sheets: Microstructure and mechanical properties
    Nie, Huihui
    Liang, Wei
    Chen, Hongsheng
    Hao, XinWei
    Chi, Chengzhong
    Li, Xianrong
    VACUUM, 2017, 144 : 247 - 255
  • [24] Microstructure and texture distribution in the bonding interface of Cu/Al composite tube fabricated by explosive welding
    Jiang, Li
    Luo, Ning
    Liang, Hanliang
    Zhao, Yang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (9-10): : 3021 - 3031
  • [25] Microstructure and texture distribution in the bonding interface of Cu/Al composite tube fabricated by explosive welding
    Li Jiang
    Ning Luo
    Hanliang Liang
    Yang Zhao
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 3021 - 3031
  • [26] Microstructure and mechanical properties of the Ag/316L composite plate fabricated by explosive welding
    Zhao, Hui
    Sheng, Liyuan
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 64 : 265 - 275
  • [27] Microstructure and mechanical properties of the Ag/316L composite plate fabricated by explosive welding
    Zhao, Hui
    Sheng, Liyuan
    Journal of Manufacturing Processes, 2021, 64 : 265 - 275
  • [28] Effect of A356 Covering Plate Temperature on the Microstructure and Mechanical Properties of AZ31/A356 Composite Plate Fabricated by Cast Roll Bonding
    Yang S.
    Li Y.
    Cao C.
    Dong P.
    Li J.
    Li M.
    Cailiao Daobao/Materials Reports, 2019, 33 (07): : 2397 - 2402
  • [29] Experimental and Numerical Study on Microstructure and Mechanical Properties of Ti-6Al-4V/Al-1060 Explosive Welding
    Mahmood, Yasir
    Dai, Kaida
    Chen, Pengwan
    Zhou, Qiang
    Bhatti, Ashfaq Ahmad
    Arab, Ali
    METALS, 2019, 9 (11)
  • [30] Effect of Annealing Temperature on Microstructure and Properties of 5052 / AZ31B Explosive Composite Plate
    Zhang Z.
    Ding X.
    Tian X.
    Shi H.
    Luo H.
    Cailiao Daobao/Materials Reports, 2022, 36 (15):
12345