Densification of porous 8 mol% yttria-stabilized zirconia component: modelling and experimental studies

被引：0
|
作者：
J. Lu
X. C. Song
T. S. Zhang
H. H. Hng
J. Ma
机构：
[1] Nanyang Technological University,School of Materials Science and Engineering
[2] Institute of Materials Research and Engineering (IMRE),Temasek Laboratories
[3] Nanyang Technological University,undefined
来源：
Journal of Materials Science | 2010年 / 45卷
关键词：
Porous Body; Densification Rate; Macroporous Material; PMMA Microsphere; Sinter Potential;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, the densification of a ceramic powder matrix that contained large macropores of the size much larger than the average grain size of the matrix was studied. The grain-boundary diffusion controlled sintering models of ceramic matrix contained large macropores were first established. A sintering potential associated with the macropores was also verified and introduced into the models. The experimental data were collected for the sintering of porous 8 mol% yttria-stabilized zirconia system with 20 vol% large pores. The predictions of the model were found in good agreement with experimental data.
引用
收藏
页码：575 / 581
页数：6
相关论文
共 50 条
  • [41] Preparation of 8 mol% yttria-stabilized zirconia by an oil flotation-assisted chemical coprecipitation route
    Yao, WH
    Tang, ZL
    Zhang, ZT
    Luo, SH
    MATERIALS LETTERS, 2002, 57 (02) : 502 - 506
  • [42] Sinterability of commercial 8 mol% yttria-stabilized zirconia powders and the effect of sintered density on the ionic conductivity
    I. R. Gibson
    G. P. Dransfield
    J. T. S. Irvine
    Journal of Materials Science, 1998, 33 : 4297 - 4305
  • [43] Effect of heat treatment on deformation and mechanical properties of 8 mol% yttria-stabilized zirconia by Berkovich nanoindentation
    Mao, W. G.
    Luo, J. M.
    Dai, C. Y.
    Shen, Y. G.
    APPLIED SURFACE SCIENCE, 2015, 338 : 92 - 98
  • [44] Fracture resistance and stable crack-growth behavior of 8-mol%-yttria-stabilized zirconia
    Kumar, Amar N.
    Sørensen, Bent F.
    2000, American Ceramic Soc, Westerville (83)
  • [45] Electrical property of 8-mol% yttria-stabilized zirconia electrolyte by spark-plasma sintering
    Jian, JW
    Chang, AM
    Yang, BC
    Zhang, YK
    SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 2004, 47 (05): : 569 - 576
  • [46] Role of 8 mol% yttria-stabilized zirconia in the improvement of electrochemical performance of lanthanum manganite composite electrodes
    Chinese Acad of Sciences, Dalian, China
    J Electrochem Soc, 6 (1932-1939):
  • [47] Improvement of mechanical strength of 8 mol % yttria-stabilized zirconia ceramics by spark-plasma sintering
    Takeuchi, T
    Kondoh, I
    Tamari, N
    Balakrishnan, N
    Nomura, K
    Kageyama, H
    Takeda, Y
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (04) : A455 - A461
  • [48] Electrical property of 8-mol% yttria-stabilized zirconia electrolyte by spark-plasma sintering
    JIAN Jiawen1
    2. The School of Microelectronics and Solid-state Electronics
    3. The Xinjiang Technical Institute of Physics and Chemistry
    4. Hongtak (Chengdu) Electronic Co.
    Science in China(Series E:Technological Sciences), 2004, (05) : 569 - 576
  • [49] Effects of 8 mol% yttria-stabilized zirconia with copper oxide on solid oxide fuel cell performance
    Lee, Jin Goo
    Jeon, Ok Sung
    Ryu, Kwang Hyun
    Park, Myeong Geun
    Min, Sung Hwan
    Hyun, Sang Hoon
    Shul, Yong Gun
    CERAMICS INTERNATIONAL, 2015, 41 (06) : 7982 - 7988
  • [50] Characterization of Erbium, Indium, and Erbium–Indium co-doped 8%mol Yttria-stabilized Zirconia
    Tahereh Namdari
    Sohrab Manouchehri
    Mohammad Reza Loghman Estarki
    Journal of Materials Science: Materials in Electronics, 2022, 33 : 19434 - 19446
12345