3D Monte Carlo simulation of grain growth in friction stir welding

被引：0
|
作者：
Z. Zhang
C. P. Hu
机构：
[1] Dalian University of Technology,State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics
[2] Dalian University of Technology,International Research Center for Computational Mechanics
来源：
Journal of Mechanical Science and Technology | 2018年 / 32卷
关键词：
Friction stir welding; Grain growth; Monte Carlo method; Fluid turbulence model;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The 3D fluid model was used to simulate the friction stir welding process. Three-dimensional Monte Carlo model with nucleation in each MC step was then applied to simulate the grain growth. The validity of this model is verified by comparison with the experimental and numerical results. The influences of tool shoulder diameter and rotational speed are further studied. Equiaxed grains in the stirring zone are increased with the increase of the diameter and the rotation speed of the shoulder. The grain sizes tend to be more uniform from retreating side to advancing side when the rotational speed or shoulder diameter is increased.
引用
收藏
页码：1287 / 1296
页数：9
相关论文
共 50 条
  • [1] 3D Monte Carlo simulation of grain growth in friction stir welding
    Zhang, Z.
    Hu, C. P.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (03) : 1287 - 1296
  • [2] Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
    Zhang, Z.
    Wu, Q.
    Grujicic, M.
    Wan, Z. Y.
    JOURNAL OF MATERIALS SCIENCE, 2016, 51 (04) : 1882 - 1895
  • [3] Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
    Z. Zhang
    Q. Wu
    M. Grujicic
    Z. Y. Wan
    Journal of Materials Science, 2016, 51 : 1882 - 1895
  • [4] The 3D simulation of friction stir welding process
    Zhang, Z
    Chen, JT
    Zhang, HW
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2005, VOLS 1 AND 2, 2005, : 1338 - 1342
  • [5] Numerical simulation of 3D friction stir welding process
    Zhao, Yan-Hua
    Lin, San-Bao
    He, Zi-Qiu
    Wu, Lin
    Hanjie Xuebao/Transactions of the China Welding Institution, 2006, 27 (06): : 75 - 78
  • [6] Monte Carlo simulation of grain refinement during friction stir processing
    Khodabakhshi, F.
    Derazkola, H. Aghajani
    Gerlich, A. P.
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (27) : 13438 - 13456
  • [7] Monte Carlo simulation of grain refinement during friction stir processing
    F. Khodabakhshi
    H. Aghajani Derazkola
    A. P. Gerlich
    Journal of Materials Science, 2020, 55 : 13438 - 13456
  • [8] Optimization of Friction Stir Welding Tool Advance Speed via Monte-Carlo Simulation of the Friction Stir Welding Process
    Fraser, Kirk A.
    St-Georges, Lyne
    Kiss, Laszlo I.
    MATERIALS, 2014, 7 (05): : 3435 - 3452
  • [9] A Monte Carlo model for 3D grain evolution during welding
    Rodgers, Theron M.
    Mitchell, John A.
    Tikare, Veena
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2017, 25 (06)
  • [10] A 3D numerical simulation of different phases of friction stir welding
    Guerdoux, S.
    Fourment, L.
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2009, 17 (07)
12345