Effect of warm-rolled pearlite microstructural features on austenitic transformation

被引：0
|
作者：
Sheng-jie Yao
Lin-xiu Du
Xiang-hua Liu
Guo-dong Wang
机构：
[1] Northeastern University,State Key Laboratory of Rolling and Automation
来源：
Journal of Iron and Steel Research International | 2009年 / 16卷
关键词：
warm rolling; pearlite; dislocation; austenite; transformation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The austenite transformation characteristics for various warm-rolled pearlite during rapid heating were investigated. The results indicate that the start temperature (Ts) is sensitive to the microstructural feature of pearlite, whereas the dislocation plays an important role in the transformation rate; at the same time, the uniformity of austenite grains is more or less affected by the amount of spheroidized pearlite. A critical effect on the state of austenite grain is created through the influence of initial microstructures on the start temperature of transformation.
引用
收藏
页码：55 / 59
页数：4
相关论文
共 50 条
  • [31] Investigation on the Recrystallization Mechanism in Warm-Rolled Ti-IF Steel
    Yan-hui Guo
    Zhao-dong Wang
    Li-qun Wei
    [J]. Journal of Materials Engineering and Performance, 2014, 23 : 1214 - 1222
  • [32] IMPACT CHARACTERISTICS AND CLEAVAGE DELAMINATIONS IN WARM-ROLLED 1020 STEEL
    BOURELL, DL
    SHERBY, OD
    [J]. JOURNAL OF METALS, 1979, 31 (12): : 105 - 105
  • [33] Crack growth behavior of warm-rolled 316L austenitic stainless steel in high-temperature hydrogenated water
    Choi, Kyoung Joon
    Yoo, Seung Chang
    Jin, Hyung-Ha
    Kwon, Junhyun
    Choi, Min-Jae
    Hwang, Seong Sik
    Kim, Ji Hyun
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2016, 476 : 243 - 254
  • [34] Microstructural evolution in warm-rolled and cold-rolled strip cast 6.5 wt% Si steel thin sheets and its influence on magnetic properties
    Wang, Xianglong
    Liu, Zhenyu
    Li, Haoze
    Wang, Guodong
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2017, 433 : 8 - 16
  • [35] Study on mechanical properties of warm-rolled AISI 1015 carbon steel
    Medrea-Bichtas, C
    Negrea, G
    Domsa, S
    [J]. ZEITSCHRIFT FUR METALLKUNDE, 2004, 95 (03): : 176 - 178
  • [36] Investigation of Prism ⟨a⟩ Slip in Warm-Rolled AZ31 Alloy
    Chun, Y. B.
    Davies, C. H. J.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (13): : 4113 - 4125
  • [37] Effect of processing parameters on properties and microstructures of warm-rolled interstitial-free (IF) steel sheets
    Wang, ZC
    Jing, CN
    Li, Y
    Han, FT
    [J]. ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 : 477 - 481
  • [38] Effects of shear band formation on texture development in warm-rolled IF steels
    Jonas, JJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) : 293 - 299
  • [39] Investigation of Prism 〈a〉 Slip in Warm-Rolled AZ31 Alloy
    Y. B. Chun
    C. H. J. Davies
    [J]. Metallurgical and Materials Transactions A, 2011, 42 : 4113 - 4125
  • [40] Constitutive analysis on the superplastic deformation of warm-rolled 6013 Al alloy
    Park, Sung S.
    Garmestani, Hamid
    Bae, G. T.
    Kim, Nack J.
    Krajewski, Paul E.
    Kim, Sooho
    Lee, Eui W.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 435 : 687 - 692
12345