Finite element computation and experimental validation of sloshing in rectangular tanks

被引：0
|
作者：
Marcela A. Cruchaga
Ricardo S. Reinoso
Mario A. Storti
Diego J. Celentano
Tayfun E. Tezduyar
机构：
[1] Universidad de Santiago de Chile USACH,Departamento de Ingeniería Mecánica
[2] CIMEC,Departamento de Ingeniería Mecánica y Metalúrgica
[3] INTEC—Universidad Nacional del Litoral y CONICET,Mechanical Engineering
[4] Pontificia Universidad Católica de Chile PUC,undefined
[5] Rice University,undefined
来源：
Computational Mechanics | 2013年 / 52卷
关键词：
Sloshing; Numerical simulation; Experimental validation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Finite element computation and experimental validation of sloshing in rectangular tanks near the primary and secondary resonance modes are presented. In particular, 2D free-surface evolution is studied. The computational analysis is based on solving the Navier-Stokes equations of incompressible flows with a monolithic solver that includes a stabilized formulation and a Lagrangian tracking technique for updating the free surface. The time-dependent behavior of the numerical and experimental wave heights at different control points are compared, where the experimental data is collected using ultrasonic sensors and a shake table that controls the motion of the rectangular container.
引用
收藏
页码：1301 / 1312
页数：11
相关论文
共 50 条
  • [41] Effect of Circular and Rectangular Drawbeads in Hemispherical Cup Forming: Finite Element Analysis and Experimental Validation
    Murali, G.
    Gopal, M.
    Rajadurai, A.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2012, 37 (06) : 1701 - 1709
  • [42] Effect of Circular and Rectangular Drawbeads in Hemispherical Cup Forming: Finite Element Analysis and Experimental Validation
    G. Murali
    M. Gopal
    A. Rajadurai
    Arabian Journal for Science and Engineering, 2012, 37 : 1701 - 1709
  • [43] A method of sloshing suppression using horizontal baffle plates (a fundamental study on sloshing in rectangular tanks)
    Department of Mechanical Engineering, Shizuoka Institute of Science and Technology, 2200-2 Toyosawa, Fukuroi shi, Shizuoka, 438-8555, Japan
    Nihon Kikai Gakkai Ronbunshu C, 2009, 749 (50-57):
  • [44] Boundary element analysis of liquid sloshing in baffled tanks
    Sygulski, Ryszard
    ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, 2011, 35 (08) : 978 - 983
  • [45] Application of finite point method to liquid sloshing in tanks
    College of Shipbuilding Engineering, Harbin Engineering University, Harbin
    Heilongjiang
    150001, China
    不详
    201206, China
    Huanan Ligong Daxue Xuebao, 8 (144-150):
  • [46] A finite-element computation for three-dimensional problems of sloshing in LNG tank
    Kim, J. W.
    Sim, I. H.
    Lee, J. M.
    Lee, Y. B.
    Bai, K. J.
    PROCEEDINGS OF THE 25TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING, VOL 2, 2006, : 561 - 568
  • [47] A shallow-water sloshing model for wave breaking in rectangular tanks
    Antuono, Matteo
    Bardazzi, Andrea
    Lugni, Claudio
    Brocchini, Maurizio
    JOURNAL OF FLUID MECHANICS, 2014, 746 : 437 - 465
  • [48] Investigation of sloshing damping in baffled rectangular tanks subjected to the dynamic excitation
    M. A. Goudarzi
    S. R. Sabbagh-Yazdi
    W. Marx
    Bulletin of Earthquake Engineering, 2010, 8 : 1055 - 1072
  • [49] Finite element method for analyzing effects of porous baffle on liquid sloshing in the two-dimensional tanks
    Gao, Hangduo
    Yin, Zhao
    Liu, Jun
    Zang, Quansheng
    Lin, Gao
    ENGINEERING COMPUTATIONS, 2021, 38 (05) : 2105 - 2136
  • [50] Numerical modelling of 3D sloshing experiments in rectangular tanks
    Battaglia, Laura
    Cruchaga, Marcela
    Storti, Mario
    D'Elia, Jorge
    Nunez Aedo, Jonathan
    Reinoso, Ricardo
    APPLIED MATHEMATICAL MODELLING, 2018, 59 : 357 - 378
12345