Optimization of turning parameters for surface roughness and tool life based on the Taguchi method

被引：0
|
作者：
Ahmet Hasçalık
Ulaş Çaydaş
机构：
[1] University of Firat,Department of Manufacturing
[2] Technical Education Faculty,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2008年 / 38卷
关键词：
Surface roughness; Tool life; Taguchi method; Analysis of variance; Ti-6Al-4V;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study, the effect and optimization of machining parameters on surface roughness and tool life in a turning operation was investigated by using the Taguchi method. The experimental studies were conducted under varying cutting speeds, feed rates, and depths of cut. An orthogonal array, the signal-to-noise (S/N) ratio, and the analysis of variance (ANOVA) were employed to the study the performance characteristics in the turning of commercial Ti-6Al-4V alloy using CNMG 120408-883 insert cutting tools. The conclusions revealed that the feed rate and cutting speed were the most influential factors on the surface roughness and tool life, respectively. The surface roughness was chiefly related to the cutting speed, whereas the axial depth of cut had the greatest effect on tool life.
引用
收藏
页码：896 / 903
页数：7
相关论文
共 50 条
  • [41] Optimization of Machining Parameters in Steel Turning Operation by Taguchi Method
    Abhang, L. B.
    Hameedullah, M.
    INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 40 - 48
  • [42] Optimization of Surface Finish in Turning Operation by Considering the Machine Tool Vibration using Taguchi Method
    Munawar, Muhammad
    Mufti, Nadeem A.
    Iqbal, Hassan
    MEHRAN UNIVERSITY RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY, 2012, 31 (01) : 51 - 58
  • [43] OPTIMIZATION OF MACHINING PARAMETERS FOR SURFACE ROUGHNESS IN EDM OF AISI 1045 BASED ON TAGUCHI TECHNIQUE
    Kumar, Subodh
    Agarwal, Sanjay
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2010, VOL 3, PTS A AND B, 2012, : 999 - 1005
  • [44] Analysis of tool vibration and surface roughness during turning process of tempered steel samples using Taguchi method
    Kam, Menderes
    Demirtas, Mustafa
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2021, 235 (05) : 1429 - 1438
  • [45] Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method
    Selvaraj, D. Philip
    Chandramohan, P.
    Mohanraj, M.
    MEASUREMENT, 2014, 49 : 205 - 215
  • [46] Optimization Parameters of tool life Model Using the Taguchi Approach and Response Surface Methodology
    Chomsamutr, Kompan
    Jongprasithporn, Somkiat
    International Journal of Computer Science Issues, 2012, 9 (1 1-3): : 120 - 125
  • [47] Cutting parameters optimization for surface roughness in machining of GFRP composites using Taguchi's method
    Palanikumar, K.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2006, 25 (16) : 1739 - 1751
  • [48] Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology
    Yusuf, Muhammad
    Ariffin, M. K. A.
    Ismail, N.
    Sulaiman, S.
    MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 1561 - 1565
  • [49] A Study on Optimization of Surface Roughness in Surface Grinding 9CrSi Tool Steel by Using Taguchi Method
    Luu Anh Tung
    Vu Ngoc Pi
    Do Thi Thu Ha
    Le Xuan Hung
    Tien Long Banh
    ADVANCES IN ENGINEERING RESEARCH AND APPLICATION, 2019, 63 : 100 - 108
  • [50] OPTIMIZATION OF SURFACE ROUGHNESS AND FLANK WEAR IN TURNING SCM440 ALLOY STEEL USING TAGUCHI METHOD
    Thirumalai, R.
    Srinivas, S.
    Vinodh, T.
    Kumar, A. L. Kowshik
    Kumar, M. Kishore
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 641 - 646
12345