Turbulent fluid flow and electrochemical mass transfer in an annular duct with an obstruction

被引：0

作者：

G. Weyns

G. Nelissen

J. G. A. Pembery

P. Maciel

J. Deconinck

H. Deconinck

M. A. Patrick

A. A. Wragg

机构：

[1] Vakgroep Elektrotechniek,Department of Engineering

[2] Vrije Universiteit Brussel,undefined

[3] Elsyca NV,undefined

[4] Flowmasters Ltd.,undefined

[5] von Karman Institute for Fluid Dynamics,undefined

[6] Institut Catholique d’Arts et Metiers,undefined

[7] University of Exeter,undefined

来源：

Journal of Applied Electrochemistry | 2009年 / 39卷

关键词：

Blockage geometry; Fins; Mass transfer coefficient; Turbulent mass transfer; Limiting current;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A so-called blockage geometry consisting of a rod with a fin positioned concentrically within a pipe is used to asses the capabilities of numerical turbulent flow and mass transfer models to predict the turbulent mass transfer coefficients. Measurements of the mass transfer coefficient have been performed for a range of fin diameters and flow rates. The limiting diffusion current measurements were performed using the ferri-ferrocyanide system and nickel electrodes. Different mass transfer turbulence models are used for the calculations and the results are compared with the measurements. The influence of flow rate and fin diameter on the mass transfer rate is examined.

引用

页码：2453 / 2459

页数：6

共 50 条

[41] SIMULATION OF HEAT TRANSFER TO TURBULENT NANOFLUID FLOW IN AN ANNULAR PASSAGE
Oon, C. S.
Badarudin, A.
Kazi, S. N.
Fadhli, M.
MICRO/NANO SCIENCE AND ENGINEERING, 2014, 925 : 625 - 629
[42] Heat Transfer Coefficients for Turbulent Flow in Concentric Annular Ducts
Gnielinski, Volker
HEAT TRANSFER ENGINEERING, 2009, 30 (06) : 431 - 436
[43] Numerical investigation of turbulent flow in an annular duct partly filled with a porous substrate
Allouache, N.
Chikh, S.
Bennacer, R.
TURBULENCE, HEAT AND MASS TRANSFER 6, 2009, : 417 - 420
[44] Mathematical Modeling of Turbulent Fluid Flow and Mass Transfer in a Steel Continuous Casting Tundish
Sharifi, N.
Seyedein, S. H.
Aboutalebi, M. R.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 311 - 316
[45] Prediction of heat and mass transfer for fully developed turbulent fluid flow through tubes
Aravinth, S
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (08) : 1399 - 1408
[46] Prediction of turbulent fluid flow and heat transfer in a rotating periodical two-pass square duct
Department of Mechanical Engineering, Chung-Hua University, Hsinchu, Taiwan
Int J Numer Methods Heat Fluid Flow, 5 (519-538):
[47] HEAT-TRANSFER IN LAMINAR-FLOW .1. POWER-LAW FLUID IN ANNULAR DUCT
WICHTERLE, K
WEIN, O
ULBRECHT, J
COLLECTION OF CZECHOSLOVAK CHEMICAL COMMUNICATIONS, 1972, 37 (06) : 1816 - +
[48] Electrochemical study of mass transfer in decaying annular swirl flow. Part 1: Axial distribution of local mass transfer coefficients
Yapici, S., 1600, (Publ by Chapman & Hall Ltd, London, United Kingdom):
[49] The stability of a flexibly mounted rotating cylinder in turbulent annular fluid flow
Akerstedt, Hans O.
Jansson, Ida
JOURNAL OF FLUIDS AND STRUCTURES, 2015, 58 : 152 - 172
[50] TURBULENT FLOW SIMULATION OF POWER-LAW FLUID IN ANNULAR CHANNEL
Gavrilov, Andrey
Ignatenko, Yaroslav
Bocharov, Oleg
Aragall, Roger
PROCEEDINGS OF THE ASME 39TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, OMAE2020, VOL 11, 2020,

← 1 2 3 4 5 →