Friction and Wear of Porous Sliding Bearings at High Temperature. Influence of MoS2 Nanoparticle Solid Lubricant

被引：0
|
作者：
H. Wisniewska-Weinert
机构：
[1] Metal Forming Institute,
来源：
Powder Metallurgy and Metal Ceramics | 2013年 / 52卷
关键词：
sliding friction; wear; sliding bearing; powder materials; quasi-hydrodynamic lubrication regime;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The paper is devoted to analysis of friction and wear of real porous sliding bearings modified with solid lubricant layers at high temperature. For this purpose, a special homemade friction tester was applied. The technology of sleeve nitriding is described. The results of the friction tests reveal about the achievement of quasi-hydrodynamic lubrication regime of powder bearings. The lowest friction coefficient is found to be f = 0.04 at 300°C. The great effect of wear rate diminishing is obtained at 300°C as interaction of microasperities is preserved at the sliding interface in quasi-hydrodynamic lubrication regime.
引用
收藏
页码：424 / 430
页数：6
相关论文
共 50 条
  • [31] Friction and wear behaviour of composite MoS2–TiO2 coating material in dry sliding contact
    Avinash Borgaonkar
    Ismail Syed
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43
  • [32] High-temperature friction and wear of titanium carbide hard alloys with an addition of a solid lubricant
    Yu. G. Tkachenko
    D. Z. Yurchenko
    A. S. Sibel’
    L. M. Murzin
    Powder Metallurgy and Metal Ceramics, 1998, 37 : 421 - 424
  • [33] High-temperature friction and wear of titanium carbide hard alloys with an addition of a solid lubricant
    Tkachenko, YG
    Yurchenko, DZ
    Sibel', AS
    Murzin, LM
    POWDER METALLURGY AND METAL CERAMICS, 1998, 37 (7-8) : 421 - 424
  • [34] Performance of CrN/MOS2 (Ti) coatings for high wear low friction applications
    Carrera, S
    Salas, O
    Moore, JJ
    Woolverton, A
    Sutter, E
    SURFACE & COATINGS TECHNOLOGY, 2003, 167 (01): : 25 - 32
  • [35] High-temperature friction and wear studies of Fe-Cu-Sn alloy with graphite as solid lubricant under dry sliding conditions
    Mushtaq, Shuhaib
    Wani, M. F.
    MATERIALS RESEARCH EXPRESS, 2018, 5 (02):
  • [36] Study on rotational fretting wear of bonded MoS2 solid lubricant coating prepared on medium carbon steel
    Luo, J.
    Zhu, M. H.
    Wang, Y. D.
    Zheng, J. F.
    Mo, J. L.
    TRIBOLOGY INTERNATIONAL, 2011, 44 (11) : 1565 - 1570
  • [37] A Possible Link Between Macroscopic Wear and Temperature Dependent Friction Behaviors of MoS2 Coatings
    Hamilton, Matthew A.
    Alvarez, Luis A.
    Mauntler, Nathan A.
    Argibay, Nicolas
    Colbert, Rachel
    Burris, David L.
    Muratore, Chris
    Voevodin, Andrey A.
    Perry, Scott S.
    Sawyer, W. Gregory
    TRIBOLOGY LETTERS, 2008, 32 (02) : 91 - 98
  • [38] A Possible Link Between Macroscopic Wear and Temperature Dependent Friction Behaviors of MoS2 Coatings
    Matthew A. Hamilton
    Luis A. Alvarez
    Nathan A. Mauntler
    Nicolas Argibay
    Rachel Colbert
    David L. Burris
    Chris Muratore
    Andrey A. Voevodin
    Scott S. Perry
    W. Gregory Sawyer
    Tribology Letters, 2008, 32 : 91 - 98
  • [39] The friction coefficient evolution of a MoS2/WC multi-layer coating system during sliding wear
    Chan, T. Y.
    Hu, Y.
    Gharbi, Mohammad M.
    Politis, D. J.
    Wang, L.
    NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 2016, 734
  • [40] Temperature-Dependent Friction and Wear of MoS2/Sb2O3/Au Nanocomposites
    Curry, J. F.
    Babuska, T. F.
    Brumbach, M. T.
    Argibay, N.
    TRIBOLOGY LETTERS, 2016, 64 (01)
12345