Identification and modelling of dynamic parameters for round link chains subject to axial loads

被引:0
|
作者
Kun Zhang
Zhengxian Sun
Jinpeng Su
Xuntao Wei
Mingchao Du
Hongyue Chen
机构
[1] Shandong University of Science and Technology,Shandong Provincial Key Laboratory of Robotics and Intelligent Technology
[2] Shandong Energy Group,School of Mechanical Engineering
[3] Liaoning Technical University,undefined
来源
关键词
D O I
暂无
中图分类号
学科分类号
摘要
A round link chain subject to axial dynamic loads composes a nonlinear viscoelastic system. Unlike the classical pounding problems, the round link chain will not only suffer linear elastic deformation, but also nonlinear plastic or impacting deformation. Based on theoretical formulation and experiments, a new approach is presented in this paper to model and identify the nonlinear dynamic parameters, namely the stiffness and damping for the round link chain. With linear deformation, nonlinear deformation and energy dissipation considered, a modified nonlinear viscoelastic model is developed to describe the vibrational behavior of the chain with numbers of round links. The linear elastic model and impacting model are combined to derive the equivalent nonlinear stiffness, while experiments and the least square fitting method are employed to identify the nonlinear damping according to the modified nonlinear viscoelastic model. The influences of the key parameters such as the length of the chain, elastic module and loading frequency on the dynamic stiffness and damping are investigated. Another test is performed to validate the identification model and good agreements are observed.
引用
收藏
相关论文
共 19 条
  • [1] Identification and modelling of dynamic parameters for round link chains subject to axial loads
    Zhang, Kun
    Sun, Zhengxian
    Su, Jinpeng
    Wei, Xuntao
    Du, Mingchao
    Chen, Hongyue
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [2] DYNAMIC STABILITY OF SPINNING PRETWISTED BEAMS SUBJECT TO AXIAL PULSATING LOADS
    LEE, HP
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1995, 127 (1-4) : 115 - 126
  • [3] EFFICIENT IDENTIFICATION OF CRITICAL STRESSES IN STRUCTURES SUBJECT TO DYNAMIC LOADS
    GRANDHI, RV
    HAFTKA, RT
    WATSON, LT
    COMPUTERS & STRUCTURES, 1986, 22 (03) : 373 - 386
  • [4] Dynamic stability of spinning pre-twisted beams subject to axial pulsating loads
    Lee, H.P., 1600, Elsevier Science S.A., Lausanne, Switzerland (127): : 1 - 4
  • [5] DYNAMIC-RESPONSE OF A ROTATING TIMOSHENKO SHAFT SUBJECT TO AXIAL FORCES AND MOVING LOADS
    LEE, HP
    JOURNAL OF SOUND AND VIBRATION, 1995, 181 (01) : 169 - 177
  • [6] Identification of Critical Parameters for Distribution Networks with DFIG and Dynamic loads
    Ali, M. S.
    Pota, H. R.
    Mahmud, M. A.
    Hossain, M. J.
    2011 AUSTRALASIAN UNIVERSITIES POWER ENGINEERING CONFERENCE (AUPEC), 2011,
  • [7] Dynamic identification of beam axial loads using one flexural mode shape
    Tullini, Nerio
    Laudiero, Ferdinando
    JOURNAL OF SOUND AND VIBRATION, 2008, 318 (1-2) : 131 - 147
  • [8] Dynamic modelling and experimental identification of four rotors helicopter parameters
    Derafa, L.
    Madani, T.
    Benallegue, A.
    2006 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS 1-6, 2006, : 2213 - +
  • [9] Planar dynamic modelling of round link chain drives considering the irregular polygonal action and guide rail
    Yuan, Pengfei
    He, Baiyan
    Zhang, Lianhong
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 2021, 235 (03) : 338 - 352
  • [10] Modelling for identification of stiffness parameters of multistorey frame structure from dynamic data
    Chakraverty, S
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2004, 63 (02): : 142 - 148