Microstructures resulting from the interaction between ferrite recrystallization and austenite formation in dual-phase steels

被引:1
|
作者
D. Barbier
L. Germain
A. Hazotte
M. Gouné
A. Chbihi
机构
[1] Arcelormittal Maizières Research SA,Laboratoire d’Étude des Microstructures et de Mécanique des Matériaux (LEM3), UMR CNRS 7239
[2] Université de Lorraine - Île du Saulcy,DAMAS, Key Laboratory for Design of Alloy Metals for low
[3] Université de Lorraine,mAss Structures
[4] ICMCB Bordeaux – UPR CNRS 9048I,undefined
来源
关键词
Ferrite; Austenite; Martensite; High Heating Rate; Austenite Formation;
D O I
暂无
中图分类号
学科分类号
摘要
The present work investigates the interactions between ferrite recrystallization and austenite formation in dual-phase steels by experiments performed at high heating rate (100 °C/s). It was shown that both ferrite recrystallization and austenite formation are strongly coupled and interdependent. The kinetics of ferrite recrystallization is strongly affected by the formation of austenite and can be even inhibited in some cases. The microstructure is more heterogeneous and anisotropic when both the austenite formation and the ferrite recrystallization overlap. It was highlighted that the degree of anisotropy depends on the volume fraction of austenite at a given temperature. Furthermore, an unusual behavior for austenite growth was highlighted. It is characterized by a much higher volume fraction than those obtained under OrthoEquilibrium and ParaEquilibrium. The results, especially those at 715 °C close to the eutectoid plateau, at which the driving force for austenite growth is classically low, suggest a diffusionless transformation for austenite.
引用
收藏
页码:374 / 381
页数:7
相关论文
共 50 条
  • [32] Effect of heating rate on ferrite recrystallization and austenite formation of cold-roll dual phase steel
    Li, Pei
    Li, Jun
    Meng, Qingge
    Hu, Wenbin
    Xu, Dechao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 578 : 320 - 327
  • [33] HARDENABILITY OF AUSTENITE AFTER INTERCRITICAL ANNEALING OF DUAL-PHASE STEELS.
    Speich, G.R.
    Miller, R.L.
    Industrial Heating, 1982, 49 (01): : 25 - 26
  • [34] The hardenability of austenite with different alloy content and dispersion in dual-phase steels
    Demir, B.
    Erdogan, M.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 208 (1-3) : 75 - 84
  • [35] Effect of Nb on Microstructure Evolution in Cold Rolled Dual-Phase Steels: Interaction of Recovery, Recrystallization and Phase Transformations
    Song, R.
    Jun, H.
    Pottore, N.
    Fonstein, N.
    Charya, Bhatta D.
    Jansto, S.
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 : 228 - 232
  • [36] Effect of Nb on Microstructure Evolution in Cold Rolled Dual-Phase Steels:Interaction of Recovery,Recrystallization and Phase Transformations
    Pottore N
    Fonstein N
    Bhatta Charya D
    Jansto S
    Journal of Iron and Steel Research(International), 2011, 18 (S1) : 228 - 232
  • [37] Formation of aligned two-phase microstructures by applying a magnetic field during the austenite to ferrite transformation in steels
    Shimotomai, M
    Maruta, K
    Mine, K
    Matsui, M
    ACTA MATERIALIA, 2003, 51 (10) : 2921 - 2932
  • [38] An automated morphological classification of ferrite-martensite dual-phase microstructures
    Dutta, Tanusree
    Das, Debdulal
    Banerjee, Siddhartha
    Saha, Sanjoy Kumar
    Datta, Shubhabrata
    MEASUREMENT, 2019, 137 : 595 - 603
  • [39] Stengthening mechanism in dual-phase acicular ferrite plus M/A microstructures
    Yakubtsov, IA
    Boyd, JD
    Liu, WJ
    Essadiqi, E
    42ND MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 2000, 38 : 429 - 439
  • [40] Diffusion model for austenite formation kinetics during inter-critical annealing of dual-phase steels
    Chantrenne, P.
    Perez, M.
    Ollat, M.
    Massardier, V.
    Fabregue, D.
    Rocabois, P.
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2019, 27 (06)